Dse710 Genset Starting Controller

タイトルまたは説明

~

~The DSE**0 is an Automatic Start Control Module that offers an advanced range of engine monitoring and protection features. The module has been designed to monitor generator frequency, generator volts, generator current, engine oil pressure, engine coolant temperature, engine running hours and battery volts. The module also displays the engine speed. When the module detects a fault condition it automatically shuts down the engine and indicates the exact fault on the modules LCD display or relevant LED indicator.   The module can be configured using the front panel or via the DSE**0 interface and a PC. The module can also be controlled from a PC that is located up to **0 meters away.

~Power Supply 8 to *5 Vdc Continuous
Cranking Dropouts: Able to survive 0 V for *0 mS, providing supply was at least *0 V
before dropout and supply recovers to 5V. This is achieved without the need for internal batteries.
Max Current Operating **0mA at *2V, **0mA at *4V ; Standby **5mA at *2V. **0mA at *4V
Alternator Input Range *5V(LN) to **7V(LN) AC (**0%) *0Hz *0Hz (min *5V AC)
Auxiliary Output: Solid state 2.4A DC at supply voltage.
Fuel/Start Output: Solid state 3.4A DC at supply voltage
Generator C.T. 5A secondary 0.5VA
Operating Temperature Range: *0 to **0°C