ECO ANTICORR1

タイトルまたは説明

ECOANTICORR 1 A Geo Polymer based pre mixed anti-corrosive protective coating formulated to prevent the corrosion. It has excellent bonding strength to steel and all other surfaces comparing to conventional anti corrosive coatings. It forms an excellent corrosion barrier against severe corrosive mediums. ECOANTICORR 1 bonds both Chemically & Mechanically with Steel & Concrete and hence highly durable. It is used in Anticorrosive coating of  

FEATURES

Chloride, Sulphate and Carbon Dioxide Resistant

Acid (>3pH), Alkali and Fire Resistant

Un-matched Bonding to both Steel & Concrete

Quick Setting,  No priming and No curing required

Extends the life of structure

Non-Toxic formulation and Contains no VOCs (Volatile Organic Compounds)

Eco-friendly Material (Does not contain resin / epoxy / cement)

Premixed, Easy to use, Just add water

TECHNICAL DATA

SURFACE PREPARATION

The steel surfaces to be coated shall be free from loose rust particles, oil, grease and materials which reduce bonding. Cleaning shall be done by sand blasting or by using hard wire brush.

The concrete to be coated shall be free from laitance, dust, loose material, surface contamination and materials which reduce bonding.

If the surface temperature is too hot, sprinkle water / wet the surface to bring down the surface temperature to ambient condition. Apply the coating as soon as the surface becomes dry.

MIXINGGUIDELINES (at *0°C)

Add **0ml of water to 1Kg of powder and mix thoroughly for 3 minutes. Initially the mix may appear dry but keep mixing and the material will dissolve to form brushable consistency slurry. Apply the mixed slurry by brush onto the cleaned surface.