Electronic Soft Dent Reduction WOYO PDR-007

タイトルまたは説明

WOYO PDR***7 Paintless Dent Repair Heat Induction



WOYO paintless dent repair tool is a vehicle specifically for small and medium-sized dent

repair.



1.Simple to operate, easy to use, low cost of learning.



2. rapid repair, to the same depression area, *0 times faster than traditional repair

method.



Fast delivery to the owner, improve workshop utilization rate, rapid recovery of

investment



3. The two operating modes adapted to different requirements



(1)Time mode: under **0% power, 0.5 seconds *4 seconds, 7 file time setting, assess the

size of the depression area, match the appropriate operating time by time gear, avoid poor time control to cause secondary damage.



(2) Power mode: *0%***0%  5 power settings, assess the size of the depression area, match

the power shift with the appropriate power from small to large, realize the fast repair.



4. The high precision control, *5% imported chip equipment components, quality guarantee,

stable and secure.



5. Large screen digital display, accurate control, real-time monitor.



Model: PDR***7

Input: Voltage ******0V    

Frequency:*0Hz         

Fuse:*0A

Output: Peak Voltage **0V    

Frequency:****5KHz    

Peak Power ≈ **0W



Packing List:



PDR Main*1

Main Cable*1

Power Cable*1

Repair Pen*3

Restoration Switch*1

One-year warranty





Manual



Before using this device, you must read the instructions. If the instructions are not

followed carefully, the operator could suffer injury, the device could be damaged, or the car being

treated might be damaged.



Before-use warning (MUST READ)

1. Not suitable for operation by those with pacemakers or artificial limbs with metal

parts.

2. Before using this device, you must wear a safety mask, safety gloves, and safety

clothing to

avoid being burned during use.

3. Operators must not have any metal objects on their person during operation, including

but not limited to watches, cuff links, keys, belt buckles, coins, or zippers.

4. This device cannot be operated in areas with conductive particulate matter, areas used

forapplying paint, areas housing or handling chemical fuels, areas of high temperature, and

areas of high humidity.

5. Once the device is powered on, flammable objects must be kept away from the device.

6. Before you power on the device, make sure that you have a fire extinguisher on hand in

case any misoperation causes a fire.

7. Do not use this device in the vicinity of safety airbags.

8. Once the device is powered, there must be personnel on site to watch over the device.

When the device is not in use, unplug the device's power cable.

9. This device should be stored at temperatures between 0 and *0 celsius. When

transporting the device, avoid vibrations or shocks.



Important warnings for use (MUST READ)

1. While the restoration head is restoring a damaged car body, the temperatures of both

the restoration head and the body will rapidly increase. Do not touch either the restoration

head or the car body before they have had time to cool down.

2. While the restoration head is in the process of restoration, the temperatures of both

the restoration head and the damaged area will rapidly increase. Using the restoration head on

one area for too long may increase temperatures to the point of damaging the car's paint job

(it is recommended that every **1.5 seconds, the operator wipes down the damaged area with a wet

rag in order to keep the temperature manageable).

3. During the restoration process, the temperatures of both the restoration head and the

damaged area will rapidly increase and the body of the car will immediately become softer. During

restoration,make sure the restoration head is not applying pressure to the car, otherwise the

restoration process itself might further dent the car.

4.The "Time/effect Dial" intensity can be set between *0% and **0%. This is the strength

that the device runs at. Press the "Work" to activate the device. Let go of it and the

device will stop.

5.Connect the "Extension Cable" to the device's Quick Connect head and the Restoration

Head's Quick Connection head, and the device is ready to use.

6. After work is complete, set the "Time/effect Dial" to "OFF", and after ***0 minutes,

set the "ON/ OFF Switch" to "OFF" as well. Give the device time to cool down, and then remove the

"**0V Power Cable". Every time you use the device, repeat the steps above for a safe and

effective experience.



Dent repair method

Car body dent diagram



First, according to the size of the dent and the color of the paint, set the work time and

intensity of the Paint Damage-Free Dent Restorer. Typical use would see the "Time/effect Dial" set

to 0.**1 second(s). Grip the restoration head and press the "Work" , and begin moving

aroundthe dented area. First trace around "area 1", moving in to "area 4" as you add heat. Wait

for cooldown. Then, begin at "area 2" and move towards "area 4" as you add heat. Wait for

cooldown.Then, begin at "area 3" and move towards "area 4" as you add heat. Wait for cooldown.

Finally,continually add heat in "area 4", then wait for cooldown. The repair process should be

complete.(Some areas might require repeated applications of heat or repetitions of the above

processes)

During the repair process, the operator MUST take note not to work in one area for more

than 1 second. It is recommended that an operator applies compressed air or a wet rag to work

areas to prevent overheating. During the restoration process, great amounts of heat will be

created,causing the metal of the car to soften. Do not apply downwards pressure while restoring,

or the dent will just become larger. During the restoration process, the operator MUST be mindful

of the surface temperature of the car. If the heat gets too high, it will ignite the paint on the

car's surface, causing greater damage. We suggest the operator first practices on the piston cap of an

unused engine or an abandoned car, this way the operator will learn the functions of the device

as well as the dangers associated with its use. Proper use of equipment is the responsibility of any

service provider!



Suitable range of use

This device is designed specifically to be used with dents on flexible steel car bodies.

The diagrams below illustrate the types of dents that can be removed. Dents like the kind

caused by impact from hailstones, which leave smooth, rounded dents, can be removed. (More active

materials may call for different devices, like pull hooks or suction cups. Consult with training personnel for specifics)



Unsuitable range of use

Sharp dents Body areas that have been damaged and reconstructed

Crumpled/creased areas or dents along creased metal



 Aluminum bodies

Using the device

1.Connect the "**0V Power Cable" to the device's "Power Input Socket", and plug the other

end of the cable into a **0V power socket. Flip the "ON/OFF Switch" to ON, which will turn on a

red light. The "Work Status Display" will also turn on. This is the normal status of the device.



2.Once it turns on, the "Work Status Display" will display the WOYO logo, and will then

display a loading message for about *0 seconds. This screen will display the work status of the

device. The device itself will release an intermittent "beeping" sound. This is the normal status of

the device.  (Note: If the device continually displays a loading message, power it down, wait 5

minutes, then  power it on again. If it still displays a loading message, contact one of our

distributors! )



3.The "Time/effect Dial" lets you select a run time between 0.5 seconds and 4 seconds, and

the  device runs at capacity regardless of the length of time selected. Press the "Work"

once to set run time.





Keywords:

Paintless Dent Repair

WOYO PDR***7

Paintless Dent Removal

AUTO BODY REPAIR

Heat Induction

Dent Repair

Dent Removal

Extreme Dent Removal 

WOYO Innovation

 Hail Repair Tool 

shrink over-stretching metal dent

 automatic control system

 Automotive beauty 

conservation Electronic

Dent Repair

Car panel Conservation 

Effective on Steel

Automotive Repair System

Electronic Soft Dent Reduction 

dent removal tool