Endress+Hauser Deltapilot M FMB53 Static Pressure Level Meter

タイトルまたは説明

Endress+Hauser Deltapilot M FMB*3 Static Pressure Level Meter

The housing with the electronic insert is mounted outside shafts and tanks in such a way that it is protected from flooding. The extension cable is secured with a suspension clamp.

• The measuring cell tube made of stainless steel (AISI **6L) and the Alloy process isolating diaphragm allow
use in aggressive media such as wastewater for example.
• Extension cable up to **0 m (***2 ft) in length (up to **0 m (**8 ft) in Ex-areas) without strain relief.

Application

The hydrostatic pressure sensor is used for the following measuring tasks:

• Hydrostatic pressure measurement in liquids and paste-like media in all areas of process engineering, process measuring technology, pharmaceuticals and the food industry
• Level, volume or mass measurements in liquids

Your Benefits

• Very good reproducibility and long-term stability
• Turn down **0:1
• Hermetically sealed CONTITE
•TM measuring cell:
– Condensate-resistant and climatic-proofed
– High reference accuracy: ±0.2 %, optionally ±0.1 %
– Minimum temperature effects
• End-to-end modularity for differential pressure, hydrostatics and pressure (Deltabar M–Deltapilot M–Cerabar M), e.g.
– replaceable display
– universal electronics
• Easy commissioning without the need for an operating tool
• Easy and safe menu-guided operation
– on-site via display module
– via 4 to *0 mA with HART
– via PROFIBUS PA
– via FOUNDATION Fieldbus
• Wide range of approvals (e.g. ATEX, FM, CSA, etc.) for international use
• Usage in drinking water: KTW, NSF
• Used for process pressure monitoring up to SIL2, certified to IEC ****8 Edition 2.0 and IEC ****1 by TV NORD