Two, the use of methods

1, the main agent and hardening agent ratio 1: 1 ( volume ratio ) when

using mixed, uniformly mixing, coated onbody, and in a fit of light pressure.

2, the appropriate surface treatment: if the surface hasa grease of

oil,then must be  firstly cleared or be abrasive to remove, plastic or rubber surface

must be properly handled.

3, can use the time : depend on the dosage amount and temperature ,

generally at *0 degrees C, **0g can use for 1 hours, the film grease dry for 5 hours.

In three, the reference data

After been effect,the  heat distortion temperature of hardening body is *0 DEG C ,and willlose adhesion after the temputure being *0 DEG C, but in winter will not lose adhesive in - *0 DEG C .

Matters needing attention:

1, general with two compositions for coating method is accurate, but to

be uniformly cured, can use the spiral films such as static mixer to be mixed.

2, When use theglue, should wear a face mask to avoid odor counterparts,

the stimulation of nasal mucosa.

3, the adhesive carelessly stick on the skin, please immediately wash with

soap orsoda.

4,  A B two agent shouldn't be  mixed before using.

5, stored in a cool and dry place, and avoid direct sunlight or exposure to fire.