タイトルまたは説明

EALSEM ES***3D KTV dynamic microphone   

 

 

Parameter

 

Net weight:*5.5g

 

Impedance:**0Ω

 

Polar Pattern:Hypercardioid

 

Frequency response:*0Hz**5KHz

 

Sensitivity:**7dB(+/*3dB)

 

Feature:

 

Net cover: Entire steel, Brazing processing, Plane angle ring (Strong prevent collision, Prevent pull, Anti-roll)

 

Cartridge : Hypercardioid, wide frequency response, High affect, Avoid shake.

 

Switch: Magnetic swithch,avoid noise, Can use to *0 thousand times by test

 

Body: Zinc alloy diecasting, painting.Drawbench electroplate of the facade.

 

Wire: Specification ø6.5mm x 5M, New PVC flexibility material,new brass wires (Prevent pull, High shield, low impedance).

 

 

·Microphone of use: 

 

 

 

plug in the mcirophone to microphone "MIC"socket. Turn the microphone switch to "ON" position, speak into the micropho

 

ne, adjust the amplifier's volume control, so that the volume is appropriate. When handing the microphone to others or when not in use, the microphone should be switched to "OFF" position.

 

 

 

·Caution:

 

 

 

 having the microphone too close to the speaker may produce a loud disturbing sound, because the mcirophones pick up sound from the speakers. This phenomenon is known as a howling Mind. If this happens, pull the mcirophone away from the speaker. As a microphone is a precision component part, be careful not to drop, hit or be given a strong shocl. Should be noted, to put the mcirophone back in the box when not in use, to avoid high and low temperatures, and high humidity.

 

 

 

·Good use:  

 

 

 

For best sound effects Fu, the microphone should be placed away from the source (mouth) approximately ***0cm. Too close to the source, will cause the air to produce a different sound, so that the sound effect will be poor.