离岸价格
Get Latest Price|
- Minimum Order
国:
China
モデル番号:
-
离岸价格:
ロケーション:
-
最低注文量の価格:
-
最低注文量:
-
パッケージの詳細:
-
納期:
-
供給能力:
-
支払いタイプ:
-
製品グループ :
連絡先担当者 Tom
Shangqiu, Henan
Product Specification
Measures from *****0ppm
Accuracy:**2%,
Battery: 2x1.5V(Button Cell)
Size:**5x*1x*3mm(6.1X1.2x0.9in)
What IS TDS?
Total Dissolved Solids(TDS) are the total amount of mobile charged
ions,including salts or metals dissolved in a given volume of
water. TDS,which is based on conductivity,is expressed in parts per
million(ppm) or milligrams per liter(mg/L).TDS includes any
inorganic element present other than the pure water
molecule(H2O)
and suspended solids.
The higher the TDS level in water, the greater the of probability
of harmful contaminants that can pose health risks or hinder the
absorption of water.
The U.S. EPAs Maximum Contaminant Level of TDS for human
consumption is **0 ppm.
Use the TDS Meter to:
Check the performance of your water filter
Check for the hardness (1 grain=*7ppm)
Make sure you always drink pure water.
Features
Hold function saves the measurements for convenient reading and
recording.
Auto-off function:turns off meter after *0 minutes of non-use to
conserve batteries.
Dual Range: Measures from ****9ppm,with a resolution of 1 ppm. From
***0 to ***0ppm,the resolution is *0ppm, indicated by drinking x *0
symbol,Factory calibrated.
Advantages:
(1)We upgrade the programme of then TDS meter up to 6 times till
now in order to make the TDS meter more accurate ( precise) and
perfect.
(2) Our factorys TDS meter can be calibrated through pressing the
Button.
Calibrating Steps as follows;
To hold TEMP Button for **5 seconds and then you will see the
number is beating in the displaying screen.
HOLD is also called Increasing Button at this time.
Therefore , if you want to increase the TDS value, you could press
the HOLD .
ON/OFF named Reducing Button at this time.
So, if you want to reduce the TDS value, you could press the ON/OFF
.
Instructions for the TDS meter
Remove the protective cap.
Turn the TDS meter on.
Immerse the meter into the water/solution up to the maximum
immersion level (2).
Waiting until the display stabilizes, The TDS meter automatically
compensates for temperature variations Once the readout is
stabilized (*0 to *5 seconds).Press the hold to save
reading.
After usage,shake off water from your meter or wipe it with a
tissue.
Taking Temperature Measurement
1.Once the meter is on,the temperature function can be used at any
time, in or out of liquid.
2.Press the TEMP .The display will switch to temperature(in
Celsius only).
3.To return to TDS mode,press the TEMP .
Precaution and notes
Do not drop the entire TDS meter in water or dip beyond the maximum
immersion level.This unit is not covered under the warranty if
water enters the unit.
2. Do not store the TDS meter under high temperature or direct
sunlight.This will shorten the life-span of the product and
potentially avoid the warranty.
3. The TDS*3 meter is calibrated at **2ppm. It is recommended
that the calibration level should be the similar to the sample to
be tested.If you are testing higher ppm(member,water quality
association).
Calibration
Your meter has been factory calibrated well.
warranty
1.Three year warranty: The product is warranted to the purchaser
against material and workmanship for three(3) years from date of
purchase.
What is covered:
Parts and labor , or replacement at the companys option.
Transportation charges to the purchaser.
What is not covered:
Transportation charges to the company. Damages from the abuse or
improper maintenance (see operating instructions and precautions).
Any other consequential damages, incidental damages ,or incidental
expenses,including damages to the property.Some states do not
allow exclusive or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to
you.
FAQ
Question 1: What is the MOQ of this item ?
Answer: The item MOQ is ***0pcs.
Question 2: How to pack this item?
Answer: Box packing is our usual practice, you can also send us
your packing design, and we can packing as your
requirement.
Question 3: How to make payment?
Answer: You can make payment by T/T,Paypal.Western Union and of
course cash face to face at our factory.
Question 4: What is the lead time?
Answer: Our lead
time is within
*0 days after receive your payment based on
MOQ:***0PCS.
Question 5: Can you accept OEM & ODM?
Answer: Yes, we can accept OEM &ODM
Contacts Info:
Whatsapp no:*************2
Skype:liuqing***4
QQ:******8
Wechat:sf*****9
国: | China |
モデル番号: | - |
离岸价格: | Get Latest Price |
ロケーション: | - |
最低注文量の価格: | - |
最低注文量: | - |
パッケージの詳細: | - |
納期: | - |
供給能力: | - |
支払いタイプ: | - |
製品グループ : | TDS meter |