FeelElec Feeltech FY6600 0-60MHz High Precision Digital Control Dual-channel DDS Function/Arbitrary Signal Generator

タイトルまたは説明

Advantage

1. FY***0 user interface displays the parameters and waveforms of the two channels at the same time. Each function has a separate user interface， different contents will be displayed when different functions are enabled.

2. The instrument uses **-bit high-speed D/A converter chip (5Vpp output quantization error is less than 1mV), **0MSa/s sample rate, *4bits vertical resolution.

3. Enable to store *4 arbitrary waveform data files, each one of waveform storage depth ***2 points * *4bits;

4. Various modulation types: AM, FM, PM, ASK, FSK and PSK modulations.

5. VCO Function (Voltage Control Output).

6. The minimum output amplitude is 1mV , minimum amplitude resolution can be up to 1mV. 

7. Duty cycle of each channel can be adjusted separately. Precision can be 0.1%.

8. 4 Channel TTL Output

9. Easy to use, powerful PC Software

Frequency Characteristic

Sine Wave: 0~*0MHz (FY******0M); 0~*0MHz (FY******0M); 0~*0MHz (FY******0M).

Square Wave: 0~*5MHz

Ramp, Triangle, Pulse, TTL/CMOS, Arbitrary Waveform: 0~*0MHz

Frequency accuracy: ±*0ppm

Frequency stability: ±1ppm/ 3hours

Waveform Characteristics

Waveforms: Sine, Square (Duty Cycle adjustable), Pulse (Pulse width and cycle time can be set accurately), Triangle/Ramp, Sawtooth Wave, CMOS, Four channels TTL, DC, Half wave, Full wave, Positive Step, Inverse Step, Positive Exponent, Inverse Exponent, Lorenz Pulse, Multitone, Noise, ECG, Trapezoidal Pulse, Sinc Pulse, Narrow Pulse, Gauss White Noise, AM, FM, and other *4 sets customer-defined waveform.

Non-Volatile Storage: Can store *4 user-defined arbitrary waveforms, (8K *4bits) * *4

Waveform Length: ***2 points * *4bits

Sampling Rate: **0MSa/s

Vertical Resolution: *4 bits

Square Rise/Fall Time: ≤7ns (VPP<5V)

Output characteristics

Amplitude（VPP）: ( Frequency≤*0MHz: 1mVpp~*0Vpp; *0MHz*0MHz: 1mVpp~5Vpp;)

Amplitude Resolution:1mV

Amplitude Stability: ±0.5%/ 5 Hours

Amplitude flatness: ±2.5%(<*0MHz);±5%(>*0MHz);

Waveform Output

Impedance: *0Ω±*0%（Typical）

Protection: All channels can work more than *0 seconds when the load is short-circuited.

DC Offset

Offset Range: Frequency≤*0MHz: ±*0V;  Frequency>*0MHz: ±2.5V;

Offset Resolution: 1mV

Phase Feature

Phase range: 0~**9.9°

Phase resolution: 0.1°

TTL Output

TTL Level Amplitude: >3Vpp

Fan-out:  >8 TTL LOAD

Rise/Fall Time: ≤*0ns

CMOS Output

Low Electric Level: <0.3V

High Electric Level: 1V~*0V

Rise/Fall Time: ≤*8ns

Frequency Meter Function

Measurement Objects: Frequency, Period, Positive/Negative Pulse Width, Duty Cycle

Input Voltage Range: 2Vpp~*0Vpp

Frequency Meter: (Resolution: 0.*1Hz; Range: 0.*1Hz~**0MHz; )

Counter Function

Counting region: ***********5

Coupled mode: 2kinds Coupling modes, DC and AC

Counting mode: Manual operation

Sweep Function

Carrier Waveform: Sine, Square, Ramp, Arbitrary (except DC)

Sweep Type: Linear or Logarithm

Sweep Direction: Up, Down and roundtrip sweep directions;

Sweep Objects: Frequency, Amplitude, Offset, Duty Cycle

Sweep Time: 0.*1S~**9.*9S/Step

Setting Range: Starting position and Finishing position can be set arbitrarily.

Sweep Range: Decided by Parameters setting.

VCO Function (Voltage Control Output)

Modulation signal range to : 0~5V

VCO signal frequency range: *****0Hz

VCO control object: voltage controlling frequency (VCF), voltage controlling amplitude (VCA), voltage controlling offset, voltage controlling duty cycle.

VCO special function: Can Amplitude Modulate (AM) or Frequency Modulate (FM) by external analog signal.

Modulation Function

Modulation Type: AM, FM, PM, ASK, FSK, PSK

Carrier Waveform: Sine, Square, Triangle, Ramp, Arbitrary waveform (Except DC)

Source: Internal (CH2) / External (VCO IN Port)

Modulating Waveform: Sine, Square, Triangle, Ramp, Arbitrary waveform

Burst Function

Carrier Waveform: Sine, Square, Ramp, Arbitrary (except DC)

Burst Count: 1~******5

Trigger Source: Manual, Internal, External (AC/DC)

General Specifications

Display Type: 2.4 inch, TFT Color Display.

Interface Type: USB to Serial interface

Interface Protocol: Command line mode, providing communication protocols.

Communicating Speed:  ****0

Power Voltage Range:  AC**0V~**0V

Technic: SMD, LSI, Reliable and durable

Buzzer: Can be turned on/off by setting.

Operation: Buttons and knob continuously.

Environment: Temp.: 0~*0℃, Humidity: ﹤*0%