タイトルまたは説明

Introduction:

Coated Alkali-resistant fiberglass mesh cloth is based on C-glass or E-glass woven cloth and treated by alkali-resistance copolymer resin on the surface. The woven cloth is made of fiberglass yarn or roving by means of leno or plain weave. The diameter of elementary fiberglass varies between 9 and *5 micron. The resin used for the surface treatment ensures the property of alkali-resistance and increases the mechanical durability that is required by the construction industry.

Application:

1. External Thermo Insulating Composite System (ETICS) & External Insulating Finish System (EIFS)

2. External and internal plaster reinforcement

3. Electrical heating mats

4. Marble Slab Reinforcement / Mosaic Carrier

5. Asphalt reinforcement (roof water-proof)

6. Reinforced lightweight construction boards

Packing and Storage：

Packing:

Coated Alkali-Resistant Fiberglass Mesh Cloth is wound on paper tubes with inner diameters of *8, *0.8, *6 or **2 mm. The quantity of fabric wound on the tube is determined by customer requirements and varies from just *0 meters to the thousands of meters needed for a machine processing. Fiberglass Mesh Cloth is offered in widths of between *0 cm and **0 cm in addition to the standard **0 cm. Each roll is wrapped in a shrink film or plastic bag. Then rolls are packed into cartons or pallets.

Storage:

Store rolls in a cool, dry location

Store away from the direct contact with ground or concrete

Store out of direct sunlight

Protect rolls from weather and other damage