タイトルまたは説明

FUEL OILS MAZUT M100/99 GOST 10585-75
When petroleum is distilled, fuel oil is produced as a residue or distillate. Any fuel oil is a form of petroleum that is burned to produce energy or heat for running an engine. These are usually low quality oils that are heated in a furnace or boiler and used in a number of industries.
MAZUT is such a fuel and is typically used in generating plants and factories. Of course different plants have expected requirements and specifications of their fuel and this is why MAZUT M100/99 and GOST 10585-75 are produced according to industry ISO standards. 
SPECIFICATIONS FOR HEAVY FUEL OIL / MAZUT M100 (GOST 10585-75)

COMPONENT    RESULT
1. Ash content, not more %    0,14
2. Mass fraction of sulphur, not more % low sulphur residual oil    0,5
3. Temperature of the flash, not less ºC in the    closed crucible
    In the open crucible ºC    110 min
4. The temperature of solidification, not higher ºC    25
5. Kinematics viscosity at 50ºC    118 max
6. Water content    0.5%
7. Mechanical impurities    Lower than 0.1%
8. Acidity  Lower than    5 mg KOH/ 100ml
9. Alkalinity    nil
10. Gross Calorific Value Kcal/kg / KJ/kg    Min9700/41300
11. Density at 15.0 deg. C Kg/l    0.8900.9200
12. Hydrogen Sulfide Content (H2S) pom    0.5 max
13. Carbon Residua    Lower than 7%
14. Vanadium (V) ppm    23
15. Aluminium (Al) ppm    5
16. Silikon (Si) ppm    12
17. Nickel (Ni) ppm    29
18. Asphaltenes m/m    3.6%
19. *@********************    Extracted to 760 mm Hg     
   Initial Boiling Point deg. C    216
        5% recovered deg. C    259
       10% recovered deg. C    310
       24% recovered deg. C    358
       30% recovered deg. C    445
       40% recovered deg. C    502
       50% recovered deg. C    534
       60% recovered deg. C    538
       75% recovered deg. C    545
       80% recovered deg. C    -
       95% recovered deg. C    550
       Final Boiling point deg. C    560
       Percent Recovered vol    78%
       Residue vol    22%
   Total Nitrogen m/m    0.192%
20. Sodium (Na) ppm    15.