タイトルまたは説明
Main of Characteristics of tyre pyrolysis plant:
1. National patent, Full open door: Speedy loading in and
steel-drawing out, easily cooling down after one batch finished,
saving time;
2. National Patent, Carbon black discharging system;
completely enclosed design to prevent dust under high
temperature;
3. National Patent, Gas scrubbers: remove acid gas and dust
from smoke, meeting environmental protection standard;
4. National Patent, Outer Gearing Drive system: making the
rotation and operation of the plants very stable, less noise;
5. National Patent: Special designed heat insulation
shell;
6. Direct heating system: Enlarging heating square to enlarge
the lifetime of reactors, easy to control the temperature;
7. High oil output and high oil quality;
8. Combustible gas recycling system: used as supporting fuel
for the plants or compressed into LPG to save energy and Prevent
pollution.
Â
Final Products:
There are three kinds of final products: tire oil, crude
carbon black, steel wires whose output and usage as follows:
Tire oil: *0%**5%, widely used as fuel oil for hotels, steel
factories, etc... Or used for generates to get electricity.
Carbon black: around *5%, used for construction bricks or as
filter of rubber products after process.
Steel wire: *2%**5%: sold or reprocessing.
Combustible gas: about 5%, can
be recycled and used during process as fuel or collected even
compressed into liquid gas, used as fuel or to get
electricity.Â
Safety: Service and Support Know-how transfer,
engineering and design of the whole process furthermore We suggest
following services for consultancy, supervision during the erection
and commissioning with test run. Our project engineer will go to
the site and offer instruction for the machine installation, the
commissioning and test run. Duration is totally *0 days, including
travel time. Working process: a. Waste
Materials are loaded into the pyrolysis chamber by the Feeding
machine or manually and then doors are locked with our tight sealed
door lock design. b. System is started
with the control panel operated by operator. The process is
automatic and controlled by our control system. The first stage of
the process is to heat up and dried up the waste.
c. Pyrolysis of the waste will begin once reaching a
certain temperature and the sync gas is generated from the
waste. d. The sync gas will be converted
into oil by the condensers and stored in the oil tank. Small
quantity of sync gas which is not converted into oil is scrubbed by
the scrubbing system and cleaned before released to
air. e. Upon completion of the pyrolysis
process, chamber will be required to cool to a certain temperature
before releasing the carbon black. f. The
carbon black will be released by our high speed carbon discharge
system automatically and stored in a special tank which is to
prevent pollution. g. Steel (for tires
contain steel wires) will be removed at the final stage upon the
carbon black being fully released. Steel removal requires opening
the big door. h. The next batch of
process can be continued. Â
国: |
China |
モデル番号: |
TS-7
|
离岸价格: |
(交渉可能)
Get Latest Price
|
ロケーション: |
China |
最低注文量の価格: |
- |
最低注文量: |
1 Set |
パッケージの詳細: |
container |
納期: |
20-30days |
供給能力: |
50 Set per Month |
支払いタイプ: |
L/C, T/T |
製品グループ : |
- |