タイトルまたは説明

Technical features:

1.the warping beam is directly transmitted ,the variable frequency control  motor has achieveved  stepless setting for yarm warping speed and the yarn speed is constant

the winding tension of yarn could be adjusted and set according to the technical requirements; adopt  tension creel variable frequency transmission which could carry out read time tension compensation to yarns according to the tension information feedback form re-winding and flapping creel ,thus toensure the constant tension in the running of yarns ,the tension rolls inthe tension cretern el adopt cross which is for the yarn to roll back

3.New yarn storage pattern which allows the yarn in the wingding wrap beam roll back to the rell

Educe the probability of breaking tarn and realize r the tension control for the re-warp of the olled back yarn and improved the quality of division beam .

 

4.Adopt clamp barking in warp beam ,pneumatic beating in the tension creel and yarn guiding  roller;the braking is stable ,simple and unreliable

5.Adopt pneumatic up up and bottom beam, pneumatic beating warp beam ;the operation is simple and convent

6.There is reciprocating type yarn tail device in the engine head which could succe ssfully separate the yarn during running and improve the warp speed .this device could autod matically upward and according to the apeed to avoid the winding of yarn

7.Blasting function is set for the space in creel reed to clean the reed gear ;the function of reed gear to flap left to right and up to down avoids the brasion of reed gear ,ensure the equality and uniformity in yarn winding

8.Possess functions to automatically length measurement ,speed measurement ,control of required length as well as required required length and selftop of division yarn.

9.Adopt functional devices in the engine head such as safety bardevice ,anti-yarn lfunctional food f lying fan board ,spare yarn receive creel etc ,

*0.The rotation working  pllatfor of yarn storage is available for the customer to choose

 

Main specifications：

 

1.Adopt self rotate individual motor ,driving the work table with three driving wheels and set driven wheel as ancillary support ;the rotation is steady .

Adopt the installation pattern of entire frame constructionion ,installed under the ground and onvenient to push the yarn creel would pushed the yarn creel to the table.

Adopt yarn creel position device to ensure the  yarn creel would would br pushed to the rotation center

Motor power :0.2KW

Diameter of  rotating table :***0mm

Height of operation table :**4mm

Area of operation table : ***0mm****0mm

Rrotation speed :8r/min

Fabric width of warping beam :***0,***0mm

Max .diameter of warp beam :**0mm .***0mm

Speed of beam warping:=

Left and right adjustable range of reed: ***0mm

Max .tension :**0N

Operation displayer :*0.4 inch touch panel