タイトルまたは説明

GARWARE EXACT

PLASTIC EXTERIOR PAINT
Garware Exact Plastic Exterior Paint is an economical
water thinnable coating, specially designed for
application on exterior walls in dry or moderately humid
climatic conditions.
Garware ‘Exact’ is much superior to normal cement
paint coatings in respect to exterior durability, finish,
washability and resistance to fungus / algae.

 

Salient Features :

· Economical water thinnable coating

· Better outdoor durability

· Smooth and pleasing finish

· Performance much superior to cement paint

· No need of curing.

 

Typical Application:Garware Exact plastic exterior
paint is specially designed for application on exterior
walls of houses and architectural buildings situated in
dry or moderately humid climatic condition.

 

Surface Preparation:The surface to be painted
should be clean, dry and free from any loose paint film,
dirt, chalk, grease, fungus and algae.

For areas, where there is excessive fungal growth, the
surface should be treated with Garware Antifungal
Solution.

 

Supply Viscosity:Thick, can be easily thinned with
water.

Application Method:Brush, Spray or roller.

No. of Coats Recommended:Two, to ensure greater
protection. It is recommended that horizontal surfaces like
window tops, parapet tops etc. are given three finishing coats
instead of two.
Thinner:Clean water.
Thinning:For normal application thin 1kg of paint with
**0ml of water. For freshly prepared plastered surfaces a
priming coat of Garware Exact is recommended after thinning
with *****0% of water depending upon the nature of the
substrate.

Drying Time Surface Dry : *0 minutes
At *7º ± 2ºC & RH *0 ± 5% : Recoating:4 to 6 hours.
Covering Capacity:***0 sq. mtrs / kg. per coat on smooth non-absorbent surface.
Finish:Smooth and matt.
Colour:White and other shades as shown in product shade card.

Storage Life:Best for use within *2 months from the
date of manufacture.

Packs Available:1 ltr, 4 Ltrs, *0 Ltrs, *0 Ltrs

Recommended Primer:Self priming after thinning