タイトルまたは説明

Gas Turbine
The gas turbine is a General Electric LM***0PK MDW model ISO rated for continuous duty and
configured for operation on either natural gas or liquid fuel. Each is configured for optional water
injection for NOx reduction, if required. Altitude, humidity, and inlet and exhaust losses will affect
power output and heat rate. In addition to the inlet air filter, the engine is equipped with a stainless
steel mesh screen in the inlet air stream for "last chance" protection against foreign object damage.
The engine is shock mounted for shipping and shipped in position, with the exception of the coupling
spacer, which is installed during commissioning.
Generator
The generator is an air-cooled, open air, *-pole, *0/*0 Hz, 0.**-.*9 PF (lagging) capable Brush
generator. The generator includes a brushless excitation system with permanent magnet generator.
Neutral, line side cubicles, medium voltage switchgear are included. The generator is hard mounted to
a base on the main trailer and includes generator air inlet filtering and air silencing.
Turbine Enclosure
The equipment package is supplied with a weatherproof acoustic enclosure for the gas turbine. The
enclosure is completely assembled and mounted over the equipment prior to testing and shipment.
Provisions for turbine removal and personnel access are included. The turbine compartment is fully
ventilated by 2 x **0% ventilation fans (provided in the air filter).
Fuel System
The gas turbine, auxiliary equipment, and controls are all configured for gas, liquid, or dual fuel
operation. The TM***0+ is supplied with a natural gas fuel system using an electronically controlled
fuel-metering valve. For full-load operation, the gaseous fuel must be supplied to the Auxiliary Trailer
skid connection at: **0 MMBtu/hr Max; **0 °F [**1 ° C] Max; **0 , +/- *0 PSIG [***5 +/- **8 kPaG; and
filtered to 3 Microns. The buyer must provide gas fuel that is clean, filtered and compliant with General
Electric specification MID-TD******1.