Generator automatic transfer switch ATS

タイトルまたは説明

1.Application 
HYCQ5M Series double power automatic transfer switch is used in AC *0HZ,rated voltage below **0V Two power supply system.It can make a automatic transfer between the common power and backup power but without manual operation.This switch accords with the following terms of national GB/T****8. *1 standards:

Operating mechanism have reliable electrical and mechanical interlocking, in order to prevent concurrent access to the common power and backup power.

 HYCQ5M,when the voltage of detected A phase and all the phases of the common power interrupt in a scheduled time, will switch to connect the load from common power to backup power, and when the common power goes back to normal,it will automatically connect the load to the common power(with phase failure protection function)

2.Technical data:

The working voltage is **0V of switch controllerTheSwitch mechanical life(N-R-N circulation) is ***0 times
The switchhas operating handle, as emergency manual operating switch using. (using in the condition ofblackout)
ItHas three steady working states:

State 1: common power switch on, standby power off;

State 2: common power switch off, standby power on;

State 3: common power off, standby power off;

4.Main structure’s working principle
N is the common power ,R is the backup power. Qn is circuit breaker for the common power , Qr is circuit breaker for the backup power. Between of them,there isMechanical interlocking double protection. The controller consist of four parts :voltage identify, phase failure protection,,control. voltage identify and phase failure protection connect the terminals of the common power. When the common power is normal,HYCQ5M switch work inautomatic gearshift,no matter what state the Qr are, Qr is off and Qn is on to insure the common power switching on the load. When the common power has problem (such asloss of voltage, undervoltage, phase failure),in a certain period of time,HYCQ5M switch will make the load connect the backup power from the common power. When the common power return to normal,then the switch will make the load connect the common power

 

TheMolded case circuit breaker of the HYCQ5M switch can be 3 poles or 4poles,can be automatic or manual operation and can realize the loadchanging-over automatically or compulsively.According to the demand of customers,the common power indication,the backup power indication, the common power tripping indication and the backup power tripping indication all connect from external terminals which lead to control panel.

This series automatic transfer switch plots simple,no need to draw up secondary connection diagram, soconvenienceproject design greatly. Outer wiring diagram shown below (indicator using AD1 AC**0V specifications)