离岸价格
Get Latest Price20 ~ 100 / Piece ( Negotiable )
|1 Piece Minimum Order
国:
China
モデル番号:
-
离岸价格:
20 ~ 100 / Piece ( Negotiable )Get Latest Price
ロケーション:
-
最低注文量の価格:
20 per Piece
最低注文量:
1 Piece
パッケージの詳細:
based on requirement
納期:
within 30 days after receiving your down payment
供給能力:
100 Piece per Week
支払いタイプ:
T/T, L/C, Western Union
製品グループ :
連絡先担当者 Ms. Lu
No.68 Mengjin Road, Shangjie District, Zhengzhou City, Henan Province, China, Zhengzhou, Henan
I Product Performance
The Liwei GJQ(X)-SF Double Sphere Rubber Expansion Joint are double
sphere designed with integral rubber flanges for tough, demanding
industrial applications, as found in: Chemical/Petrochemical
Plants, Industrial Process Piping Systems, Marine Services, Power
Generation Plants, Pulp/Paper Plants, Steel Mills, Water/Wastewater
and Pollution Control Systems.
Installed next to mechanical equipment or between the anchor points
of a piping system to:
1) Absorb Pipe Movement/Stress
2) Reduce System Noise
3) Isolate Mechanical Vibration
4) Compensate Alignment/Offset
5) Eliminate Electrolysis,
6) Protect Against Start-Up Surge Forces.
The Liwei GJQ(X)-SF Double Sphere Rubber Expansion Joint is a twin sphere design with more length, the supply range is from *2mm to ***0mm, and design pressure can be 1.0MPa/1.6MPa/2.5MPa. Compared to Single Sphere Rubber Joint(GJQ(X)-DF- I, GJQ(X)-DF- II ), mechanical and acoustical performance can be almost double by changing to the most commonly specified twin sphere construction. Twin sphere designs are more flexible and allow greater movement.
II Application Range
Equipped with the excellent comprehensive performances of flexible
rubber joint, Liwei GJQ(X)-SF Double Sphere Rubber Expansion Joint
can be used for lift and transportation of raw water and sewage,
transportation of water supply, cooling cycle water of thermal
power plant, condensate water of metallurgy industry and chemical
materials of chemical industries, cooling and dilution of oil and
chemical industries and flexible connection of other
industries.
It is also suitable to transport all grain and powder material
and gas for its high abrasive resistance.
In addition, special notifications are hereby conducted for design
units and clients so as to ensure the project quality. Please note
to install anti-break stop device, if Liwei GJQ(X)-SF Double Sphere
Rubber Expansion Joint are designed to install close to pump exit
nozzle and pipes corner. If your pipes need to be buried, please
use our patent-buried protective devices. In a word, remark
requirement for use, and we will provide satisfactory service to
you.
III Features and Benefits:
1) Versatile hand-built construction. Made in China
2) Bellows to Absorb directional movement
3) Absorb vibration, noise and shock
4) Bellows Compensates for misalignment
5) More compensation capability
6) Embedded steel reinforce ring enable the pressure resistance
7) Solid galvanized steel floating flanges speed the installation
time
8) Integral rubber flange design, prevent pulling out
9) High tensile aircraft cable is embedded in the raised face
rubber ends to prevent pull out and avoids the sharp cutting edge
of solid steel rings
*0)No gaskets required; DIN PN*0/*6 drilling standard, other flange
drilling available, including ANSI **0lb/**0 lb, BS, and JIS
IV Physical and Mechanical Properties Form
No | Item | Index | Test value | ||
Inner rubber | Outer rubber | ||||
1 | ≥Tensile strength(MPa) | *2 | *3 | *3.6 | |
2 | ≥Break strength (%) | **0 | **0 | **4 | |
3 | ≤Break permanent deformation (%) | *5 | *0 | *2 | |
4 | ≤Brittleness temperature(℃) | **0 | **0 | **0 | |
5 | ≥Viscosity(KN/m) | 2.0 | 2.0 | 5.6 | |
6 | Aging hot air (**0℃×*8h) | Tensile strength change (%) | **5~**5 | **5~**5 | *0 |
Tensile rate change (%) | **0~**0 | **0~**0 | 5 | ||
7 | ≥Acid resistant*0%H2SO4×**8h | 0.7 | 0.7 | 0.*5 | |
8 | ≥Alkali proof*0%NaOH1×*8h | 0.7 | 0.7 | 0.*5 |
V Material List
No. | Name | Material |
1 | Inner rubber | *1R, CR, EPDM, NR, NBR |
2 | Outer rubber | *1R, CR, EPDM, NR, NBR |
3 | Framework layer | Polyester cord fabric |
4 | Flange | Q**5 |
5 | Reinforcing ring | Steel wire rope |
VI Technical Parameters for Double Sphere Flexible Rubber Joint
DN
Diameter |
FF Length (mm) | Axis displacement | Radial displacement | Deflexion
displacement |
||||||
Type-I | Type-II | Type-I | Type-II | Type-I | Type-II | |||||
mm | inch | Extension | Compression | Extension | Compression | |||||
*2 | 1¼″ | *0 | 6 | *0 | 9 | ±7.5° | ||||
*0 | 1½″ | *5 | 7 | *0 | 9 | ±7.5° | ||||
*0 | 2″ | **5 | 7 | *0 | *0 | ±7.5° | ||||
*5 | 2½″ | **5 | 7 | *3 | *1 | ±7.5° | ||||
*0 | 3″ | **5 | 8 | *5 | *2 | ±7.5° | ||||
**0 | 4″ | **0 | *0 | *9 | *3 | ±7.5° | ||||
**5 | 5″ | **5 | *2 | *9 | *3 | ±7.5° | ||||
**0 | 6″ | **0 | *2 | *0 | *4 | ±7.5° | ||||
**0 | 8″ | **0 | *6 | *5 | *0 | *5 | *2 | *5 | ±7.5° | ±*0° |
**0 | *0″ | **0 | *6 | *5 | *0 | *0 | *2 | *5 | ±7.5° | ±*2° |
**0 | *2″ | **5 | *6 | *5 | *0 | *0 | *2 | *5 | ±7.5° | ±*2° |
**0 | *4″ | **5 | *6 | *5 | *5 | *5 | *2 | *0 | ±7.5° | ±*2° |
**0 | *6″ | **5 | *6 | *5 | *5 | *5 | *2 | *0 | ±7.5° | ±*2° |
**0 | *8″ | **5 | *6 | *5 | *6 | *7 | *2 | *0 | ±7.5° | ±*2° |
**0 | *0″ | **5 | *6 | *5 | *6 | *8 | *2 | *0 | ±7.5° | ±*2° |
**0 | *4″ | **0 | *6 | *5 | *0 | *0 | *2 | *3 | ±7.5° | ±*2° |
**0 | *8″ | **0 | *6 | *5 | *0 | *5 | *2 | *3 | ±7.5° | ±*2° |
**0 | *0″ | **0 | *0 | *5 | *3 | ±*2° | ||||
**0 | *2″ | **0 | *6 | *5 | *5 | *5 | *2 | ±7.5° | ±*2° | |
**0 | *6″ | **0 | *6 | *5 | *5 | *5 | *2 | *5 | ±7.5° | ±*2° |
***0 | *0″ | **0 | *6 | *5 | *5 | *0 | *2 | *5 | ±7.5° | ±*2° |
***0 | *4″ | **0 | *5 | *0 | *5 | ±7.5° | ±*2° | |||
***0 | *8″ | **0 | *6 | *5 | *0 | *0 | *4 | *8 | ±7.5° | ±*0° |
***0 | *2″ | **0 | *0 | *0 | *8 | ±*0° | ||||
***0 | *6″ | **0 | *0 | *0 | *0 | ±*0° | ||||
***0 | *0″ | **0 | *0 | *0 | *0 | ±*0° | ||||
***0 | *4″ | **0 | *8 | *5 | *0 | *0 | *4 | *6 | ±7.5° | ±*0° |
***0 | *2″ | **0 | *8 | *5 | *0 | *5 | *4 | *8 | ±7.5° | ±*0° |
***0 | *0″ | **0 | *0 | *5 | *0 | ±*0° | ||||
***0 | *0″ | **0 | *0 | *5 | *0 | ±*0° | ||||
***0 | *8″ | **0 | *0 | *0 | *0 | ±*0° | ||||
***0 | *6″ | **0 | *0 | *0 | *0 | ±*0° | ||||
***0 | **4″ | **0 | *5 | *0 | *0 | ±*0° | ||||
***0 | **2″ | **0 | *5 | *0 | *0 | ±*0° | ||||
***0 | **0″ | **0 | *5 | *0 | *0 | ±*0° |
国: | China |
モデル番号: | - |
离岸价格: | 20 ~ 100 / Piece ( Negotiable ) Get Latest Price |
ロケーション: | - |
最低注文量の価格: | 20 per Piece |
最低注文量: | 1 Piece |
パッケージの詳細: | based on requirement |
納期: | within 30 days after receiving your down payment |
供給能力: | 100 Piece per Week |
支払いタイプ: | T/T, L/C, Western Union |
製品グループ : | rubber |