Gravity Concentration Equipment

タイトルまたは説明

Table of Contents
Table of Contents    1
Crush and Grind Equipment    1
Ball Mill    1
1,Overview    2
2,Uses and application scope    2
3,working principle    2
4,Structure    2
5,Technical Specifications    2
6,Application Scenarios    3
Jaw Crusher    4
1,Overview    4
2,Working principle    4
3,Features    4
4,Technical Specifications    4
5,Application Scenarios    5
Hitting Granulating Machine    5
1,Overview    6
2,Structure    6
3,Technical Specifications    6
4,Application Scenarios    6
Swaying Feeder    7
1,Overview    7
2,Features    7
3,Technical Specifications    7
4,Application Scenarios    8
Trough Feeder    8
1,Overview    8
2,Technical Specifications    9
3,Application Scenarios    9


Crush and Grind Equipment

Ball Mill
 
Product： Ball mill

Type: MQG series
 
1,Overview
    Ball mill applies to grind all kinds of ores and other materials, widely used in mine-selection, building materials and chemical industry, etc. it can be divided into dry and wet two grinding ways. According to the different ways of discharging, it can be divided into grid type and overflow type.
2,Uses and application scope
    Ball mill is the key equipment for crushing after the material has been broken. it is widely used in cement, silicate products, new building materials, refractory material, chemical fertilizer, black and non-ferrous metal and glass ceramics production industry, it grind all kinds of ores and other grind ability materials in dry or wet way
3,working principle
    The ball mill is the horizontal tube rotating device, outer edge of the gear drive, two chambers, and lattice-type. By feeding device the materials evenly are fended into the first milling chamber through the hollow shaft. There are ladder lining plate or corrugated lining plate in the chamber, the mill containing different specifications steel-balls, the rotating of cylinder can make centrifugal force to the ball for a certain height of fall, they have a severe impact and abrasive effect on the materials. After coarse grinding in the first chamber, it will enter into the second chamber through single-layer partition plate, inner chamber is lined with plane liner which has steel-balls for further materials grinding. Powder discharged through the discharge grate plate to finish grinding operation.
4,Structure
    The machine is composed by feeding part, discharging part, turning part and driving part (reducer, small driving gear, electric motor and electric control). The quill shaft adopts cast steel part and the liner is detachable. The turning gearwheel adopts casting hobbling process and the drum is equipped with wear-resistant liner, which has good wear-resistance. The machine is with stable and reliable working condition.
Moreover, according to different materials and discharging methods, there are dry ball mills and wet ball mills for choice.
5,Technical Specifications
Model    Shell rotation speed(r/min)    Ball load(t)    Feeding size(mm)    Discharging size(mm)    Capacity    Motor power(kw)    Weight(t)
                    (t/h)        
Ø**0****0    ****8    1.5    <=*0    0.****0.*9    0.***2    *8.5    4.6
Ø**0****0    *6    2.7    <=*0    0.****0.*9    1.**3.5    *2    5.6
Ø***0****0    *6    3    <=*5    0.****0.6    1.**4.8    *0    *2
Ø***0****0    *6    3.5    <=*5    0.****0.4    1.**5    *7    *2.8
Ø***0****0    *2.4    5    <=*5    0.****0.4    1.**5.8    *5    *3.8
Ø***0****0    *9.7    7.5    <=*5    0.****0.4    **5    *5    *5.6
Ø***0****0    *7    *1    <=*5    0.****0.4    **6    **0    *1
Ø***0****0    *8    *2    <=*5    0.****0.4    3.**6    **0    *4.7
Ø***0****0    *5.4    *1    <=*5    0.****0.4    ***0    **0    *8
Ø***0****0    *5.4    *5    <=*5    0.****0.4    4.***2    **5    *2
Ø***0****0    *4.1    *1    <=*5    0.****0.4    6.***5    **0    *4
Ø***0****0    *4.1    *3    <=*5    0.****0.4    7.***7    **5    *6
Ø***0****0    *3.7    *5    <=*5    0.****0.4    6.***6    **5    *4
Ø***0****0    *3.7    *4    <=*5    0.****0.4    ***3    **5    *2
Ø***0****0    *3.7    *6    <=*5    0.****0.4    ***8    **0    *0
Ø***0****0    *1.5    *7    <=*5    0.****0.4    ***5    **0    *8.5
Ø***0****0    *1.7    *5    <=*5    0.****0.4    ****6    **0    *2.8
Ø***0****0    *1.7    *5    <=*5    0.****0.4    ****8    **0    *4
Ø***0****0    *1.7    *5    <=*5    0.****0.4    ****0    **0    *6
Ø***0****0    *1    *3    <=*5    0.****0.4    ***0    **5    *4
Ø***0****0    *1    *0    <=*5    0.****0.4    8.***0    **0    *5
Ø***0****0    *0.7    *0    <=*5    0.****0.4    ****0    **0    *4
Ø***0****0    *0.7    *8    <=*5    0.****0.4    ****0    **0    **2
Ø***0****0    *8    *5    <=*5    0.****0.4    ****-    **0    **7
6,Application Scenarios
Production Scenarios    Production Scenarios    Customer Scenarios
          

Jaw Crusher
 
Product： Jaw crusher

Type: PE|PEX series
 
1,Overview
    Jaw Crusher is mainly used to crush kinds of mining stones primarily, and the largest compression resistance of the material to be crushed is **0MPa. The jaw crusher is widely used in mining, metall-urgical industry, building material, highway, railway, and chemical industry.

    The motor transmits power through belt, drives the moving  jaw do periodic motion to the fixed jaw surround the eccentric shaft. The angle between toggle plate and moving jaw increases when moving jaw moves up. So the moving jaw closes to the fixed jaw. The stuff will be crushed in this process. The angle of Jaw Crusher between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw of Jaw Crusher moves away from fixed jaw by the pulling of rod and spring, the products after crushing will be discharged from the outlet of Jaw Crusher.
2,Working principle
    Motor drives V-belt and belt pulley to make moving jaw do periodic motion by eccentric shaft.  Moving jaw moves upwards to the fixed jaw when angle between toggle plate and moving jaw increases, so materials are crushed in this process.  Moving jaw moves downwards from fixed jaw by pulling rod and spring when angle between toggle plate and moving jaw decreases, so the final crushed materials are discharged from the outlet.  The moving jaw moves periodically according to the eccentric shaft movement, and the materials entering the crushing chamber are crushed and discharged continually.
3,Features
(1) Large crushing ratio and even discharged materials .
(2) Large and reliable adjusting range of discharged outlet meets various requirements .
(3) Safe and reliable lubrication system, easily changed spare parts and easy maintenance .
(4) Simple structure and low operation cost , Low noise and little dust pollution .
4,Technical Specifications
Type    Feed
Opening
(mm)    Max.
Feeding
Size
(mm)    Adjusting
Range Of
Discharge
Opening
(mm)    Capacity
(t/h)    Rotation
Speed Of
Eccentric
Shaft
(r/min)    Motor
Power
(KW)    Total
Weight
(t)    Dimensions
(mm)
PE***0***0    **0***0    **5    ****0    **3    **0    5.5    0.6    **0***0***0
PE***0***0    **0***0    **0    ****0    **6    **0    7.5    1    **0***0***0
PE***0***0    **0***0    **0    ****0    ***0    **0    *1    1.3    ***0***0***0
PE***0***0    **0***0    **0    ****0    ***0    **0    *5    2.8    ***0****0****0
PE***0***0    **0***0    **0    *****0    ****0    **5    *0    7    ***0****0****0
PE***0***0    **0***0    **5    *****0    *****0    **5    *5    *2    ***0****0****0
PE***0***0    **0***0    **0    *****0    *****0    **0    *5    *0    ***0****0****0
PE***0****0    **0****0    **0    *****0    ******0    **0    **0    *9    ***0****0****0
PE***0****0    **0****0    **0    ******0    ******6    **0    **0    *1.5    ***0****0****0
PE***0****0    **0****0    **5    ******0    ******0    **0    **0    *3    ***0****0****0
PE***0****0    **0****0    **0    *****5    ******0    **0    **0    *2    ***0****0****0
PE****0****0    ***0****0    **0    ******5    ******0    **0    **0    *5    ***0****6****0
PE****0****0    ***0****0    ***0    ******0    ******0    **0    **0    **0.9    ***0****0****0
PEX***0***0    **0***0    **0    ****8    ***5    **0    *5    3.8    ***0****0****0
PEX***0***0    **0***0    **0    ****0    ****5    **0    *0    5.5    ***0****0****0
PEX***0****0    **0****0    **0    ****0    ****2    **0    *7    7    ***0****0****0
PEX***0****0    **0****0    **0    ****0    ****1    **0    *5    8.5    ***0****0****0
PEX***0****0    **0****0    **0    ****0    *****5    **0    *5    *1    ***0****0****0
5,Application Scenarios
Customer Scenarios    Customer Scenarios    Customer Scenarios
          

Hitting Granulating Machine
 
Product： Hitting granulating machine

Type: Hitting granulating machine
 
1,Overview
    Hitting granulating machine is lately developmental new kind of crusher equipment. This kind of machine is designed for small-scale gold processing plant, especially adapt to free gold recovery. Assembled with Centrifugal Concentrator orjig can establish a processing plant, and it is very effective to recovery free gold. Since the technologic process doesn’t need add any chemicals, it is environment friendly. Using the advanced crushing structure, the crusher can achieve crush and grinding at one time. Choosing Mn*3 (High Manganese Material) the hammer head is longer life. It is especially suitable for the remote region, because of the simple structure, easy operation，maintenance and convenient for moving. You can operate it without receiving any special training.
2,Structure
    The motor drives the rotor rotates of the Hitting granulating machine at a high speed through the belt, and on the rotor there are series hammers. When the materials get into the working area of hammers, they are crushed by the rotating hammers of the hammer crusher with high rotation speed, the materials which are crushed to meet the required size can be discharged by the outlet and become the final products, the large size products are brought back to the crushed area by the hammers of the hammer crusher for being refreshed Until they reached the required size.
3,Technical Specifications
Model    Capacity
 (T/h)    Feeding Size
 (mm)    Layout Size
 (mm)    Power at User Option
                Motor(Kw)    Diesel
**0×**0    **2    ≤*0    ≥0.*5    ****8    *4
**0×**0    **6    ≤*0    ≥0.*5    ****2    *0
**0×**0    ***0    ≤*0    ≥0.*5    ****0    *5
 
 
 
 



4,Application Scenarios
Production Scenarios    Customer Scenarios    Customer Scenarios
          

Swaying Feeder
 
Product： Swaying feeder

Type: Swaying series
 
1,Overview
    Swaying feeder is widely used in mineral processing industry, coal industry,build materials industry, chemical industry and other industries. It is fit for feeding small particle materials in ore bin, especially fit for the feeding process of ball millwith belt conveyor. It is able to deliver blocky and granular materials from storage silo to receiving device evenly, regularly and continuously in the production process.
2,Features
(1) Simple structure, reliable operation, convenient installation and adjustment .
(2) The motor can be replaced by speed adjustment motor to adjust the feeding capacity according to the customers requirements .
(3) Low power consumption,Less noise and convenient maintenance, Its closed type structure can effectively prevent dust pollution .
(4) Stable vibrating, reliable performance and long working life .
3,Technical Specifications