GSM 3G M2M RTU S272

タイトルまたは説明

Model: S**2
Name: GSM 3G M2M RTU (8DI*6AI*4DO*1TH*1USB*1RS**2/**5)
 
Keyword: 3G RTU, GPRS RTU,RTU SMS Alarm, 3G Remote Control,PLC Controller,Small PLC,GSM PLC, Small controller, Smart PLC controller,Small RTU,remote terminal unit rtu,GSM RTU,SMS Controller,RTU,Temperature controller, Humidity Controller, Remote Controller, water pump controller, generator controller,Alarm Controller. remote data acquisition, Data Acquisition I/O Modules,data logger,mini data logger,smart data logger, GPRS data logger, RS**2 data logger, Data transfer master, data collector
 
The GSM 3G M2M RTU is a multi I/O port remote terminal unit, through the RS**2/**5 port can connect intelligent meters or PLC. It is special for BTS monitoring, remote data acquisition, telemetrically, BTS access control and other applications. It supports voice communication, SMS, GPRS, 3G communications.
 
 

1. ARM Cortex-M4 *2 Bit RISC Core, **8 MHz inside, RTOS system;               
2. Widely Rated voltage range, 9~*6VDC, Inbuilt large capacity rechargeable backup battery;                                                            
3. 4G SD card for save historical data, USB port for configuration and upgrade firmware;                                                          
4. 6 analog s, *2bits, supports **5V, ***0mA, ***0mA;                    
5. 4 Relay outputs, 5A/*0VDC,5A/**0VAC;                                          
6. 8 digital s, dry contact or level . One of the can be used as counter;                                                                     
7. 1 temperature probe , 1 humidity transducer ;                          
8. I/O ports with opto-isolated, RS**2/**5 with *5KV ESD protection;                 
9. 2 IP data centers, supports Modbus TCP,TCP/IP protocol over GPRS/3G network;                                                                        
10. RS**2/**5 can be used as data transparent transmission for different intelligent meters or PLC;                                                 
11. Automatically resend the data while communication failure, GPRS failure will alert by SMS text;                                                      
12. Supports remotely restart the RTU, and configure it by SMS commands remotely;                                                                  
13. Supports over voltage protection and phase-reversal protection;                           
14. *0 SMS Alert and auto dial numbers, can program to receive specified alarm message.                                                                                                                       
15. *0 access control authorized numbers, can open the BTS door or turn on/off machine with a free charge call at the specified time.