GSM ALARM GSM COMMUNICATOR CONTACT ID TO SMS CONVERTER

タイトルまたは説明

APPLICATIONS:
• Receiving of Contact ID codes from the security control panel and their converting into SMS readable format. 
• Supports sia contact id codes receiver standard
• PSTN line RING TIP emulator. Module emulates PSTN Contact ID receiver.
•Module can work with any central panel which has PSTN communicator and meets Ademco Contact ID data format according to SIA SIA DC**5 standard.
• Tested withfolowing Central panels: DSC PC***6; DSC ***5; DSC ***0; Paradox SPC****8EX; Paradox Digiplex Evo**2; Paradox Esprit; Pyronix Matrix 6; Teletek CA*2SE; Satel CA**0; Texecom
• System control by using maxim-dallas iButton keys (iButton DS***0A - *4 bit id)
• 1 temperature probe
• 4 outputs for remote control via gsm cell phone
• 8 general alarm s including power supply voltage monitoring via sms messages
• **0 remote control users via free short call
• **0 users control by GSM call or using maxim-dallas iButton keys
• Configuration using standard mini-USB cable
A  lot  of  security  control  panels  are  able  to  transfer  events  to  the  security  monitoring  stations  via  PSTN  land phone line via Contact ID protocol. These messages help to quickly find out where the event took place and what kind of event is it, e.g. triggered sensor, security system in ARM state, security system troubles, network failure etc.
However a lot of security control panels are not able to send SMS to a user to inform about alarms and other events  of  the  security  system.  To  solve  this  problem  the  module  GTCOM  has  been  develop ed,  which  can  simulate PSTN   line,  receive  DTMF  Contact  ID  messages  and  convert  them  into  readable  format  as  well  as  to  send  SMS message to a user via GSM network.
The module is compatible with any security control panel, which supports DTMF (tone) dialling and Ademco Contact ID data format according to SIA SIA DC**5 standard. 
The GTCOM module may be applied for protection of house, garages, cottages, vehicles as well as for access control, gate control, objects' automation, smart house and temperature co ntrol. For premisses protection and in many other applications.
The GTCOM module has 7 zones, therefore it can be used to expand zones of the security control panel.In the event of burglary, the device, depending on programmed operation algorithm, is able   to call or to send SMS to up to *6 users. A user is able to hear what is going on premises after answering a call or he may make a call by himself. A user is able to receive an SMS with detailed information about status of each protected zone and number  of alarm events. The user is able to control the device via SMS messages only if he knows user's password. If a call is being performed from the telephone number not included in the system„s data base, the call is rejected immediately. 
The  module  has  system  voltage  control.  If  power  supply  voltage  drops  below  the  defined  value,  a  user automatically will be notified via SMS. The SMS message includes voltage of backup battery (System Voltage). The module has external temperature sensor. A user receives information about temperature alarms and restores via SMS messages.