GSM GPRS Gate opener Remote Controller(10AIN/6DIN/4Dout/1RS485) S240

タイトルまたは説明

Name:GPRS Remote Controller(*0AIN/6DIN/4Dout/1RS**5)
Model:S**0
keywords:
GSM GPRS Remote Controller,parking latch control, gsm gate opener, remote control machine

The King Pigeon S2XX Serial GSM GPRS Remote Controller is a universal GSM dialer and controller as well as a GSM GPRS Remote Control and Alarm Unit. it provides multi digital relay outputs(**0VAC/3A, *4VDC 3A,), upto 6 digital s(Opto-isolated,Active Contact, 3~*4VDC, Completely isolated).can be used as pulse counter s), 2 temperature s for DS*8B*0, multi analog (both of ***0mA and **5V, *2 bit resolution), RS**5 Port(Support Modbus RTU Protocol, more protocols can be added according to application requirements), reserved RS**2 Serial Port and USB port for setting and download upgraded firmware by user on-site. It allows you to monitor and control an alarm or remote stations or equipments or machines by SMS(Short Message Service) Or GPRS. Another, it can transmit data from apparatus (thermometer, humidity meter, electric meter, flowmeter, PLC) to user or monitoring center by GPRS.

 

The King Pigeon S2XX Serial GSM/GPRS Remote Controller equipped Siemens MC*5i quad-band GSM Module inside to make it is industrial class reliability, is a low cost, wireless M2M, wireless data logger, universal GSM GPRS Engine which can remote control outputs, transmit and receive analog, digital and pulse counter data, PLC, Varity metering equipments to any device connected to the Wireless GSM GPRS network such as mobile phones, Web Sites, monitoring center, control room, SCADA, etc.

The GSM GPRS Remote Controller S2XX can be used as:

A Switch with SMS Remote Control. SMS texts for switching particular terminals on/off are configurable.
A Timer-Switch which can be activated automatically. It can be used as preset time when the GSM GPRS Remote Controller need work and when it neednt work. 4 daily timer and 7 Weekly Timers.
A Relay with dialling-in remote control. Up to 4 tel. numbers can be authorized for it. Because calls are not answered dialling-in control within GSM is free of charge. (it only checks the callers number and - if the number is authorized - responds with relay activation.) This can be used for parking latch control, gsm gate opener, remote control machine, etc.
An automation system. Each can link to output actions, this is very useful when the temperature upto appointed value, need switch on the air-conditioning immediately, or when water overflow and need switch on the dryer, or when somebody broken into the door or windows need to start the CCTV and Siren.
A SMS reporter. The digital Inputs activations or deactivations can be reported by SMS and optionally confirmed by phone calls. Each can have its own message texts and the message can be programmed by users.
A Pulse Counter. The digital s can be used as the pulse counter, the user can setup both of interval value activated alarm and total value activated alarm.
A Data Logger. The unit can save the all of the acquisition data in internal memory storage and upload to internet by GPRS network according to schedue, no distance limitation.
A Wireless Data Acquisition to SCADA or HMI or Monitoring Center. The unit can acquisition the varity data(E.g.: Pressure, Level, Current, Voltage, digital status, pulse counter, digital relay output status, temperature value, humidity value and other) and upload to the SCADA(Real time dynamic data) or HMI or Mornitoring Center by SMS or GPRS, no distance limitation.
A Wireless Intelligent Meter Reader. The GSM GPRS Remote Controller can be used to read remotely intelligent meter data to SCADA or monitoring center by RS**2 port or RS**5 Port, at present supports ABB,KL,HHE intelligent meters by RS**5, more special meters communication protocol can be add according to application requirements.
A GSM GPRS Remote Termials (GSM GPRS Remote Controller). It can work with the supervisioning center, in the supervisioning center, the own can remote monitoring and control the remotely terminals by GSM GPRS Network.This is very useful to Fuel tank monitoring, Oxygen in hospital, Flood level, street light control, wellhead control, BTS environment monitoring, power transmission system monitoring and other applications.
What Applications does the GSM GPRS Remote Controller suitable for?

1. Security Alarm System applications;

2. Supervision and monitoring alarm systems

3. Automatic monitoring system;

4. Vending Machines;

5. Pumping Stations;

6. Buildings and Real Estate;

7. Weather Stations remote control and data logging;

8. River Monitoring and Flood Control remote control and data logging;

9. Oil and gas pipelines remote control and data logging;

*0. Corrosion protection

*1. Valve controls;

*2. Wellheads;

*3. Energy saving,street lights control system;

*4. Tanks, levels, temperatures,water leakage applications;

*5. Transformer stations;

*6. Unmanned machine rooms;

*7. Control room application;

*8. PLC and Automation System, M2M;

*9. GSM Access Control System, GSM Gate Opener, etc.

Monitoring Center or OPC Server or SCADA or HMI:

The GSM GPRS Remote Controller supports GPRS Communication, it is useful to create the monitoring center,HMI and SCADA at reliable and low cost.

The user can according to the abovementioned SMS Commands List and formart to create special monitoring cetner and OPC server or other applications.

Also, we provided the Kingview SCADA and its OPC server to users, it can save time and cost to the implementation of varity applications. From the SCADA, the user can remotely monitoring a large quantity of remote equipments and intelligent meters. All the operations are dynamic. See below:

More about the SCADA and how to setup the SCADA please read the SCADA Setup for GSM GPRS Remote Controller Instructions.

In this user manual, we introduce the basic knowledge of the monitoring center types and how does them work.

1.    Directly to SCADA System

If the users want to log data to its present SCADA system directly, the user must develop the GSM/GPRS Driver then install in its present SCADA according to our communication protocols. The topological graph please see below:




2.   Monitoring by SCADA System through OPC Server

If the users want to log data to its present SCADA system through OPC Server, the user must develop the GSM/GPRS Driver then install in its present OPC Server according to our communication protocols, so that the OPC Clients can access the GSM/GPRS RTU through OPC Server. The topological graph please see below:




3.   By customer customization monitoring center

If the users want to log data to its customization monitoring center, the user must develop the GSM/GPRS Driver then install in its monitoring center software according to our communication protocols. The topological graph please see below:


4.   By Mobile phone through SMS.


The GSM/GPRS RTU can send the reports and events by SMS to 1 SMS Center number and 6 user numbers.

Features:

Quad-band Siemens MC*5i GPRS Module and High-density performance line ARM **-bit  MCU inside;

Direct connection to the GSM GPRS Network;

Transparent Serial Data Tunneling using low cost SMS/GPRS network;

Remote Configuration by SMS Messages or GPRS;

Upload data via GPRS or SMS on Schedule or event occurs;

Supports Dynamic Domain name or Static IP address;

Supports SMS, GPRS UDP and TCP protocols;

Supports Modbus RTU protocols;

1USB Port, 1 RS**2 Serial Port, and 1 RS**5 Serial Port;

6 Opto-isolated digital s can be programmed to NC/NO/Edge/Level type by switch, Passive Contact Type and Active Contact (3~*4VDC) type can be programmed by DIP switch, DIN1 and DIN2 are Completely isolated. when alarm occurs can send Alarm Messages by SMS or GPRS or auto dial the preset phone numbers;

6 digital s can be used as Pulse Counters;

4 Digital Relay Outputs can be programmed as dial to switch on/off with free communication fee, alarm-linkage and Schedule to action, also can be send SMS to switch on/off;

*0 Analog Inputs. (*2 bit resolution, **5V or ***0mA);

2 Thermometer Inputs for DS*8B*0, measures temperatures from **5°C to ***5°C. Fahrenheit equivalent is**7°F to ***7°F, ±0.5°C accuracy from **0°C to **5°C, Thermometer resolution is programmable from 9 to *2 bits;

4 Power Source Outputs for external device, like Thermometer or transducer, 3 with 3.3V/**0mA, another with *2VDC/**0mA;

Supports 1 SMS Center Number and 1 IP address or 1 Dynamic Domain name;

MTBF(Mean Time Between Failure) up to 2Years;

User friendly PC Programming Interface, it can remotely program the terminals as well as to   upload the data from the terminals by SMS or GPRS, all of the Current Value or status of the terminal can be display directly, and also will display the SMS Command details while you programming it;

More Protocols can be updated by user through USB Port with the updated firmware;

Power supply 9V to *4V(Recommend *2VDC).

Standard Package list:

GSM/GPRS RTU X 1

Power supply adapter X 1 (*2V 1.5A 1)

USB cable for communication X 1

CD (PC Configurator and User Manual) X 1

GSM Antenna X 1