HBP box-type of industrial water chiller

タイトルまたは説明

Box-type industrial chiller product technology features:
Principle and Use
Box-type industrial chillers are use air or water for condenser cooling medium , use water as the refrigerant of the industrial cooling equipment.it Widely used in various fields of plastics, electronics , food , pharmaceutical , electroplating , chemical , printing , coating , laser and CD-ROMs and other industrial equipment or mold cooling.
 
The chiller features:
1.Type
Within the box-type industrial chillers containing chilled water pump and water tank , on-site installation is simple , easy to maintain
2.Evaporator
3 - 5HP chiller using a submerged coil evaporator unit 8HP more than a shell and tube or plate evaporator heat transfer efficiency, and water resistance .
3.Controller
All microcomputer controller accurate , intelligent , and truly achieve perfect control of the machine
Water temperature & Antifreeze solution
4.protection 
Box-type industrial chillers have perfect protection function
5.Receive customized
6.Pump & Water tank
7.Microcomputer function
8.Environmental protection refrigerants
9.Movement
*- 8HP of the box-type industrial chiller`s bottom of the fuselage is equipped with a wheel, you can easily move .
*0.Compressor & major refrigeration original
Compressor selection of Europe and the United States imports closed scroll compressor (Or  piston ) , small vibration, resistance to liquid strike capability , high efficiency , wide operating temperature range.
*1.Test center

Notes: (room temperature) default conditions:
1．The parameters in the nominal conditions are as follows: chilled water inlet / outlet water temperature is *2℃/ 7℃; Ambient temperature is *5℃ .
2. Temperature conditions: Chilled water inlet temperature range 9℃ ~ *0℃ ambient operating temperature 0° C ~ *3℃
3. Host the actual head of the pump head , minus the host internal head loss ( 1mH2O = 9.8kPa )
4. Nominal conditions evaporation device water side of the dirt coefficient is 0.**8 m • ° C / kW
5. Power standard : 3P- **0V - *0HZ , it is recommended that the three-phase system , allowing the voltage fluctuation of ± 5 % , the frequency fluctuations of ± 2%
6. In addition to the above specifications and requirements , the company can provide non-standard products according to customer requirements.