タイトルまたは説明

We sell high pressure suspension mill and other various of grinding mills or grinding machines which are our patent products and have got CE and ISO ***1 Certification. High Pressure Suspension mill is mainly made up of the mainframe, separator, blower, finished powder cyclone collector, bag filter and connecting pipes, etc. According to users’ requirements, the mill can also be equipped with accessory equipments like crusher, bucket elevators, hopper, electromagnetic vibrating feeder and switch box, etc. Inside the mainframe, the roller subassembly is suspended on the roller suspender through horizontal supporting axis, and the roller suspender fixed up with the main shaft and shovel stand. Located outside of the roller bearing house, the pressure springs make rollers push down the inside surface of ring through horizontal supporting axis. Shovels installed on the shovel stand and rollers rotate together when the motor drives main shaft through transmission device and the rollers rolls appressed the inside surface of ring and rotate at the same time. The separator impellers are driven by motor through transmission device to rotate, more higher the speed of separator impellor, more fine the powders been separated. Characteristics: 1. Compared with other mills, its capacity increases by *0%**0% under the same power condition, and compression force of rollers to material improve *******0kgf under the force of high-pressure spring. 2. Size of final product can be 0.**3mm (*0mesh) –0.**3mm (**5mesh). Some can reach the fineness of 0.**3mm (***0 mesh). 3. High Pressure Suspension Mill meets the requirement of national dust-dump standard. 4. The separator can be adjusted very easily. 5. The multi-class seals are adopted to keep the grinding equipment tightly closed.