High Pressure Suspension Mill

タイトルまたは説明

High Pressure Suspension Mill can be used for ultra-fine powder processing of **0 non-inflammable and non-explosive materials with Moth’s hardness below 9.3 and moisture content below 8%, such as barite, limestone, pottery, scoria, in the work of mine, metallurgy, chemical，building materials. The particle size of finished product can be adjusted from *****5 mesh. With the special device increased in the machine, it can produce ****0 mesh coarse powder. Working Process In the mainframe of High Pressure Suspension Mill, there are strong springs with pressure as high as********0 kg equipped on the roller suspender. When High Pressure Suspension Mill works, the roller rotates around the principal axis, and clings to ring under the effect of the strong spring and eccentricity. Its press is 1.2 times of Raymond mill under the same press condition, so the production is largely increased. When the materials are sent into the grinding chamber, they are brought to the space between the roller and ring and get grinded. Then the powder grinded will be blown into separator. The fine powder after departed with the air is discharged through the outlet as final product. The large-sized powder falls back for regrinding. The air will be back to the blower for repetition of the above process. The left air will come to the bag filter to get cleaned. When the wear and tear between roller and the ring reaches certain degree, adjust the length of the strong spring, so to keep the invariable pressure between the roller and the ring, to make sure the stable production and the fineness. Main Characteristics 1. Compared with other mills, its capacity increases by *0%**0% under the same power condition, and compression force of rollers to material improve *******0kgf under the force of high-pressure spring. 2. All the materials with Moth’s hardness below 9.3 can be grinded and smashed. 3. Size of final product can be 0.**3mm (*0mesh) –0.**3mm (**5mesh). YGM*5, YGM*5, YGM*5, YGM*5