タイトルまたは説明

Product Specifications
Brand Name : BNS
PTFE Molding Powder (MICRONIZED PARTICLE) DF**6
No.    Item        DF**6
Grade A    Qualified
1    Smoothness & Cleanness    White sheet surface,  even texture,  no residue. impurity quantity (≤0.5mm)≤2
2    Tensile Strength, (Mpa)    *9    *7.4
3    Elong. At Rupture(%)≥    **0    **0
4    Moisture Content.(%)≤    0.*4
5    Stand Relative Density    2.****2.**0
6    Electric Strength(KV/MM)≥**0    *0
7    Average Grain,  (µm)    *8±2
8    Volume Density, (g/L)    ******0
9    Residue on sieve (*5 μ m)(%)≤    3
*0    Melting Point(℃)    **2±5
*1    Thermal Inst,  Index ≤    *0
*2    For Check    Execute according to requirement of HG/T********7
*3    For Process    For Molding 
*4    Usage    The resin are mainly used as the general required electric 
source,  which is suitable for making film,  the products of thin 
wall,  seal,  gasket,  club,  panel,  tube,  axletree,  seal ring,  and 
loop, filling compounds. etc.
*5    Packing Storage &   Transportation     1. PTFE is packed in double layer PVC bags inside and in hard circular barrels outside,  on the barrels,  
there should be attached  label and quality certificate,  on which there are brand,  trademark,  executive 
criterion. type,  grade,  lot NO. and net content,  pack date,  checker,  packager.
2. PTFE should be stored in clean dry warehouse to prevent from dust,  moisture,  foreign matters etc.
3. The products are transported according to non-dangerous 
products,  Heat,  moisture,  freezing and strong shock should be avoided during transportation. Over-bumpiness and compression is apt to make the resin bind together.