タイトルまたは説明

High quality wear resistant alumina microbead is a grinding media for mixing mill, emery mill, vibrate mill, mainly used for non-metallic mineral grinding, and is suitable for material grinding of mini zirconium silicate, sulfur, alumina, emery, mini titanium dioxide , feldspar , zeolite, wollastone, talc, kaolin, etc, and widely used in chemical industry, coating industry, paint industry, color industry, rubber industry, etc Al2O3 ≥*5% Specific Gravity（g/cm3） 3.**3.2 Mohs Hardness 8.5 Anti-Compression Strength（Mpa） ≥***0 Equivalent Wear Loss（g/kg.h） ≤0.*8 Feature: This product is high density, good toughness, good attacking, low wear loss, good stable chemistry, good erosion resistance, high grinding efficiency. Advantages 1. The main material of this product is high purity quality alumina, which will cause not negative effect to the grinded material 2. Low wear loss： this product used complex ball grinding , and formed by iso-static pressure with high density which will greatly improve grinding efficiency and reduce grinding time to reduce energy cost , and compare other alumina ball the ratio of grinding wear is 1:(2.**3.0)（Equivalent to the same abrasive material consumption of our products 1Kg, need consume the aluminum ball 2.**3.0Kg） 3. Increase material of mill: *0% material of mill will increased if used our factory’s ball material of formula. 4. Decrease ball grinding current: above *0% current will be decreased and dry powder material each ton of ball grinding will be saved ***2 degrees, if used our factory’s ball material of formula. 5. Saving time of ball grinding: **3hours will be saved if used our factory’s ball material of formula. 6. Improve customs product quality: white color **3 degrees will be improved, if used our factory’s ball material of formula.