Hight Intensity Plastic Road Stud

タイトルまたは説明

Specification: **0×*0×*8.8mm 　Color: Yellow, White，etc. 1. Putting an end to the "shelling" phenomenon: adopting high-intensity plastic（without fill）body 2. Avoiding "shelling" phenomenon to the fullest extent:furnished with installation hole using steel shooting gun（while on the cement road , you should first drill a hole and put expansion pipe as well as screw）and adhesive to fix it on the asphalt road 3. Shorten the construction cycle. You don't have to set road barrier and let people watch after finish installing and cars could go immediately. 4. Both of its loading and impact strength exceed ministry of communications standard. 5. Its illuminant intensity parameter is **4 times that of communications ministry first-class products'. 6. Its chemistry capability index conforms to and exceeds the ministry of communications standard 7. Its aging resistance capability is**3times the engineering project plastics' and applicable environment temperature is **0～**5℃ 8. Application range ：Decelerating line, central line, lane line, edge line and so on. Installation Method: Asphalt road: 1. clean the road 2. put glue on 3. put the spike in the installation hole of high-intensity plastic road stud by spike-shooting gun Cement road: 1. drill a hole in the proper place and put the expansion pipe 2. clean the road 3. put glue on 4. thread the screw in the installation hole of high-intensity plastic road stud