タイトルまたは説明

IC－*****1Znic-Series phosphate coating agent

1. Overview

  IC******1 phosphate coating agent assigned two kinds including IC******1A for preparation and IC******1B for adding, which is little-sediment and low-temperature phosphating agent for surface phosphating of iron and steel parts, cold-rolled sheet. There are some advantages, such as low-temperature, fast filming, little sediment, light pollution. Phosphate coating is thin and firm, dense and uniform, and nuclei is small. The product is suitable for large-scale spraying line or the combination of spraying and dipping with strong processing capability.It is the representative product of high-quality products bonderite developed by our company.

2. Using method

2.1 Tank liquor preparation (1 ton)

a. Tank reagent:  IC******1A zinc-series phosphate coating agent

               IC******1B zinc-series phosphate coating agent

               NT***5 neutralizer

               AC****1 accelerator

b. First, add water to tank with *0 % of the capacity of tank. Second, add NT***5 neutralizer of 4.5 to 5.0 kg. Third, add IC******1A of *0 kg and stir evenly until flocculent precipitate was completely dissolved. Finally, adding margin water, and stir evenly. Confirm process indicators , heat to processing temperature. Before using, add AC***0 accelerator of 1.6 kg and stir evenly.      

2.2 Tank liquid management

Total acidity: *8 to *6

Free acidity: 0.9 to 1.8

Accelerator: 2.0 to 5.0

Temperature: Dipping: *5 to *5 degrees 

Spraying: *5 to *5 degrees

Time:  Dipping: *5 to *5 minutes  

           Spraying: 2 to 4 minutes

Spraying pressure: 0.6 to 1.0 kg/cm2.