Hot! Shenzhen Jinhua LED resin letter glue adhesive By Shenzhen Jinhua Electronic Materials Co., Ltd.,

Hot! Shenzhen Jinhua LED resin letter glue adhesive

离岸价格

Get Latest Price

15 ~ 18 USD / Kilogram

20 Kilogram Minimum Order

国:

China

モデル番号:

312AB-8

离岸价格:

15 ~ 18 USD / Kilogram （交渉可能） Get Latest Price

ロケーション:

最低注文量の価格:

15 per Kilogram

最低注文量:

20 Kilogram

パッケージの詳細:

20kg each set

納期:

three days

供給能力:

10000 per Month

支払いタイプ:

T/T, L/C, D/A, D/P, Western Union

製品グループ :

製品仕様

Classification: Other Adhesives
Usage: LED letters,
Brand Name: jinhua

color:transparent

タイトルまたは説明

Epoxy Resin 3*2AB*8
Feature
Epoxy resin *12AB*8 can be cured under normal temperature and low temperature, with good flowing property, natural defoaming, anti-yellow, high transprancy, no ripple, bright in surface, it can be cured at room temperature or high temperature. ..

Application
**2AB*8 can be widely used for high quality LED channel letter, photo frame, drops of glue, signs, cards, crafts, lamp potting and mould filling, etc..

Properties before Hardening

Part	*2A8	*2B8
Color	Transparent	Transparent
Specific gravity	1.15	0.96
Viscosity (*5â„ƒ)	*0-*0CPS	**0 MAXCPS
Mixing ratio	A: B = *0:3(weight ratio)
Hardening conditions	5 â„ƒ×8H to 10H or 5â„ƒ×1.5H (2 g)
Usable time	5â„ƒ×40min (*0g)

Operation
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below *5 â„ƒ, please heat A glue to *0 â„ƒ first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than *5%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than *5%, is not suitable for room temperature curing, suggest to use the heat curing.

Properties after Hardening

Hardness, shore D	<*5
Withstand voltage, KV/mm	22
Flexural strength, Kg/mm2	*8
Volume resistivity, Ohm3	1x05
Surface resistance, Ohmm2	5X05
Thermal conductivity, W/M.K	1.*6
Induced electric loss, 1KHZ	0.*2
Withstand high temperature, â„ƒ	*0
Moisture absorption, %	<0.*5
Compressive strength, Kg/ mm2	8.4

Caution
1,The operating environment should be ventilative and should keep away from fire. Closely sealed after use.
2, Avoid eye contact,  in case of contact, wash with plenty of water and get medical attention immediately.
3, If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4, Keep away from children.
5, Please take a trial before application to avoid usage mistake.

Storage And Shelf Life
1, Store at the tempeture of *5°C or cool and dry place.  Avoid from sunlight, high tempeture or hign humidity enviroment.
2, Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room tempeture of *5°C.

Notice: The above data is typical data measured by the laboratory environment under
the temperature of *5 â„ƒ, and humidity of *0%. For customers reference only.

国:	China
モデル番号:	312AB-8
离岸价格:	15 ~ 18 / Kilogram （交渉可能） Get Latest Price
ロケーション:	-
最低注文量の価格:	15 per Kilogram
最低注文量:	20 Kilogram
パッケージの詳細:	20kg each set
納期:	three days
供給能力:	10000 per Month
支払いタイプ:	T/T, L/C, D/A, D/P, Western Union
製品グループ :	-