タイトルまたは説明
Hot water submersible pump
It is suitable for hot water well,hot spring,farmland
irrigation,garden watering,fountain landscape,rainwater recycling
system,mine drainage,emergency,urban water supply,enterprises and
institutions carrying the underground water with the advantages of
low noise,high efficiency,and energy saving.
Use conditions:
It is suitable for hot water well,hot spring,farmland
irrigation,garden watering,fountain landscape,rainwater recycling
system,mine drainage,emergency,urban water supply,enterprises and
institutions carrying the underground water with the advantages of
low noise,high efficiency,and energy saving.
Zhonglan submersible water pump introduction:
Zhonglan QJR series stainless steel well submersible pumps
,designed for pumping high temperature liquid,it is composed of YQS
submersible electric motor and QJ submersible electric pump in
directly connection. The parts of the pump are precisely
manufactured by HT**0 materials. It adopts mixed-flow or
centrifugal single-suction multi-stage pump body structure,with
built-in one-way valve and suction filter;the impeller is fixed on
the pump shaft by a unified key,and is equipped with a pump shaft
protection sleeve.The submersible motor adopts water-lubricated
bearing,and the upper is equipped with sand thrower and skeleton
oil seal to prevent mud and sand from entering the motor. This
series pumps are chacteristic of compact structure,reliable
operation,durability,easy to use,large power,less trouble,low
maintenance cost,etc. As long as the motor filled with clear
water,the pump can run normally.
Zhonglan Hot water submersible pump characteristics:
Impeller:stainless steel cast iron material **4/**6
Pump shell:cast iron HT**0,or stainless steel i.e.2Cr*3,**4
Pump shaft:cold drawn steel with Chrome plated,or stainless steel
2Cr*3(tempering treatment at ***0℃,strengthening torque)
Motor seal:rubber seal 0 -ring,mechanical seal
Motor expansion control bag is made of rubber.
Performance parameters:
Pump medium: similar to water,a high-temperature liquid with a
solid content of 0.*2% or less.
Temperature of medium: maximum **5℃ for deep well hot water
pump
PH value of medium:***0
Power : frequency *0Hz,*0Hz( can be customized)
Rated voltage **0V[**0Vã€***0Vã€***0Vã€*0KV]±5%
Flow range:*****0m3/h
Water head range :*****0m
power range:*****0kw (secondary speed motor,can be customized
four-stage/ six-stage motor)
Rotating speed:***0rpm(secondary speed motor)
Remarks:
1.Deep well pump should be used in clean water with a content of
less than 0.**1%,pump house is equipped with pre-moistening water
tank,the capacity should meet a start pre-moistening water.
2.For newly installed or overhauled deep well pumps,should adjust
the clearance between the pump shell and the impeller,ensure no
friction between the impeller and the pump shell during
running.
3.Before the operation of the deep well pump ,clean water should be
filled into the house of the shaft and bearing for
pre-moistening
4.Before starting the deep well pump,the inspection items should
meet the following requirements:
1)Base bolts have been tightened.
2)The axial clearance meets the requirements,the safety nut of
the adjusting bolt has been installed.
3)The packing gland has been screwed and lubricated.
4)The motor bearing are lubricated
5)Rotating the rotor and the stop mechanism by hand are flexible
and effective.
5.The deep well pump should not be idled without water. The primary
and secondary impeller of the pump should be immersed below 1m
water level,pls check the change of the water level in the
well frequently during running.
6.During running,when found there is a large vibration around the
foundation,then should check the pump bearings or motor packing
wear,when there is excessive wear and water leakage,then should
replace new pieces.
7.The deep well pumps containing mud and sand have been sucked and
discharged,before stopping the pump, should rinse the pump with
clean water.
8.Before stopping the pump,should first close the outlet valve,cut
off the power supply,lock the switch box. When it is winter,should
release the water in the pump completely.
Why choose us? 3 advantages:
1.quick delivery! Stock pumps can be shipped quickly;
2.Reliable quality! Manufacturing pumps many years, have a number
of new and old customers;
3.Competitive price! Manufacturer supply directly without
middlemen.
We are professional Hot water submersible pump manufacturer. If you
want to know more related products, please click here.
国: |
China |
モデル番号: |
-
|
离岸价格: |
(交渉可能)
Get Latest Price
|
ロケーション: |
china |
最低注文量の価格: |
- |
最低注文量: |
1 Unit |
パッケージの詳細: |
- |
納期: |
15days |
供給能力: |
- |
支払いタイプ: |
D/P, L/C, T/T |
製品グループ : |
- |