离岸价格
Get Latest Price9.5 ~ 15 USD / Kilogram ( Negotiable )
|200 Kilogram Minimum Order
国:
China
モデル番号:
-
离岸价格:
9.5 ~ 15 USD / Kilogram ( Negotiable ) Get Latest Price
ロケーション:
China
最低注文量の価格:
9.5 per Kilogram
最低注文量:
200 Kilogram
パッケージの詳細:
5kgs/drum, 25kgs/drum, 200kgs/drum forHY 9055 silicone rubber for Electronic Potting Compound
納期:
within 3 days after we confirm your bank receipt
供給能力:
8 Ton per Day
支払いタイプ:
T/T, L/C, Western Union
製品グループ :
-
連絡先担当者 Cherry
Shenzhen, Guangdong
HY 9055 of Electronic Potting Silicone
Rubber
Â
1. Product
Feature of Electronic Potting Silicone
Rubber
HY
9055 silicone rubber is a kind of low viscosity, Inherent flame
resistance, two components addtion cured potting silicone with
heat-conducting. It cures with both on room temperature and heated
temperature. It has the feature of the higher temperature the
faster of the curing time. It can be applied to electronic
components for insulation, waterproofing, fixed and flame
retardant. It mainly applied in electronic components surface with
materials of PC(Poly-carbonate)ã€PPã€ABSã€PVC, etc. and
metal materials.
Â
2. Typical
Application of Electronic Potting Silicone
Rubber
HY
9055 electronic potting silicone rubber could be applied
to
-
high powered electronics,Â
-
DC/DC module and circuit board which requires heat dissipation and
high temperature resistance.
-It
can be broadly used for LED screen, Wind Power Generator, PCB
substrate, etc.
3. Technical
Guidelines of of Electronic Potting Silicone
Rubber
a,
Pls put part A and part B in separate container and stir evenly
before mixing the two part together.
b,
Mixing Ratio: part A: part B = 1:1
                                                                 Â
c,
Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5
minutes.Then the mixture could be used for
pouring.
Â
Note:The thickness of
the silicone affects the curing time. If the silicone used is a
little thick,then the curing time will be a little longer.The
temperature also affects the curing time.When in lower temperature,
we suggest customers appropriately heat the mixture to accelerate
vulcanization. With temperature of 80～100℃, the
silicone will cure in 15 minutes; while in 25℃ room temperature,
the silicone will cure around 8 hours.
4.Notes of
Electronic Potting Silicone
Rubber
a.The
following material may hinder the curing of HY 9055, So pls use
after the test. When necessary, pls clean the application
areas.
Organotin compound or Condensation silicone with
organotin
Sulphur, sulfide and
sulfur rubber materials.
Amine
compounds as well as contains the amine
materials.
Pewters solder flux
b. HY
9055 should be sealed storage.The mixture should be used up
disposably to avoid causing waste.
c. HY
9055 belongs to non-dangerous goods, but keep away from mouth and
eyes.
d.
When it gets stratified after a period of storage, Please mix it
evenly before using,which does not affect the
performance.
Â
Technical
Parameters of of Electronic Potting Silicone
Rubber
| Features | Part A | Part B | |
| Before Curing | Appearence | Gray Fluid | White Fluid |
| Viscosisty（25℃cps） | 2500±500 | 2500±500 | |
| Operation features | Mixing Ratio | 1：1 | |
| Viscosisty(after mixing)（cps） | 2000～3000 | ||
| Operating Time（25℃  hr） | 120 | ||
| Curing time（min，25℃） | 480 | ||
| Curing time（80℃  hr） | 20 | ||
|
  After Curing |
Hardness（Shore  A） | 55±5 | |
| Thermal conductivity [W（m·K）] | ≥0.8 | ||
| Dielectric Strength（KV/mm） | ≥25 | ||
| Permittivity（1.2MHz） | 3.0～3.3 | ||
| Volume Resisivity（Ω·cm） | ≥1.0×1016 | ||
| linear expansibility [m/（m·K）] | ≤2.2×10-4 | ||
| Fire Resistance   | 94-V1 | ||
| 国: | China |
| モデル番号: | - |
| 离岸价格: | 9.5 ~ 15 / Kilogram ( Negotiable ) Get Latest Price |
| ロケーション: | China |
| 最低注文量の価格: | 9.5 per Kilogram |
| 最低注文量: | 200 Kilogram |
| パッケージの詳細: | 5kgs/drum, 25kgs/drum, 200kgs/drum forHY 9055 silicone rubber for Electronic Potting Compound |
| 納期: | within 3 days after we confirm your bank receipt |
| 供給能力: | 8 Ton per Day |
| 支払いタイプ: | T/T, L/C, Western Union |
| 製品グループ : | - |
