HY-E630

离岸价格

Get Latest Price

9 ~ 13 / Kilogram ( Negotiable )

100 Kilogram Minimum Order

国:

China

モデル番号:

HY-E630

离岸价格:

9 ~ 13 / Kilogram ( Negotiable )（交渉可能） Get Latest Price

ロケーション:

Guangdong China

最低注文量の価格:

9 per Kilogram

最低注文量:

100 Kilogram

パッケージの詳細:

1kg/Jar, 5kgs/Jar, 20kg/drum, 25kgs/drum, 200kgs/drum

納期:

within 3 days after payment confirmed in our bank.

供給能力:

8 Ton per Day

支払いタイプ:

PayPal, Western Union, L/C, T/T

製品グループ :

HY-E series

今すぐお問い合わせください

SHENZHEN HONG YE JIE TECHONOLOGY CO., LT

China

無料会員

連絡先担当者 Mr. hualiang

Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Longgang, Shenzhen, Guangdong,, Shenzhen, Guangdong

今すぐお問い合わせください

製品仕様

An exceptional fluidity and good operability, easy to demold:Good tensile and tear strength
Low shrinkage :Non-deformation
Outstanding bubble releasing:Aging resistance
Environmentally, food-grade:high temperature resistance (200Ã¢ï¿

タイトルまたは説明

Technical DateSheet

HY-E**0 Addition Cure Mold MakingSilicone Rubber

Description

HY-E**0 is a kind of two part silicone rubber in addition cure or platinum cure type with mixing ratio of 1:1 or *0:1 . It can cure at room temperature as well as under heat . Its a kind of food grade silicone and mainly used for mold making.

Application

HY-E**0 silicone rubber is mainly used for making molds of concrete stone,GRC,polyurethane products ;wax, candle decoration ; rapid prototyping and tyre molds; chocolate,candy and similar products .

Technical Parameters

Model	Color	Mixing ratio(%)	Pot life (mins, under *5â„ƒ)	Curingtime	Hardness (Shore A )	Tensile- strength (MPa)	Tear- strength (kN/m)	Viscosity ï¼ˆAfter A/B mixed ,mPa.sï¼‰	Shrinkage rate (%)	Elongation ï¼ˆ%ï¼‰
HY-E**0	Translucent	1:1	****0	*5(hrs under 5â„ƒ) ***0 (mins under 0â„ƒ)	*0±2	9.0±1.0	*7±2	*0±*0	≤0.1%	**0%

Characteristics

ï¼ŠAn exceptional fluidity and good operability, easy todemold

ï¼ŠGood tensile and tear strength

ï¼ŠOutstanding bubble releasing

ï¼ŠNon-deformation

ï¼ŠLow shrinkage

ï¼ŠAging resistance ,high temperature resistance (**0â„ƒ)

ï¼ŠEnvironmentally, food-grade

Operation instructions

Step 1: prepare the original molds

Prepare an perfect original mold and clean it totally before operation .

ï¼ŠNotes:Make sure your original molds and operation tool cleaned up totally to avoid uncure problem .

Step 2: Take **0 G part A and**0 Gpart B(Or **0 G part A and *0 G part B)and mix them evenly.

ï¼ŠNotes: Addition cure mold makingsilicon rubber istwo part flowing liquid, Pls follow the step strictly:

         1.Weigh the two part exactly by electronic weight..

If any part not in exactly weight , it may cause changing of hardness , or even cause uncure problem.

         2.Mix part A and part B evenly.

Otherwise the silicon rubber will be partly solidified and this will give birth to difficulties in your final operation. Whats more, the finished molds will meet a short life. All of these will cause a waste of silicon rubber.

Step 3: Vacuum pumping

Without exception, this step takes less than *0 minutes. Otherwise, it will causecross linking reaction, and no more further steps will be available.

Step 4: Pouring casting orBrushoperation

ï¼ŠNotes:1. For simple pattern products we suggest use pouring operation way , which will be very easy to operate and demould. Pourable silicone require light viscosity which will be easy to flow smoothly and easy to de-air .

        2.For delicate pattern products we suggest use brushing operation way , which can copy the pattern exactly . Brushable silicone require high viscosity which wont be easy to flow away and easy to brush .

        3.We suggest to set the silicone mold for another *2 hours after demould before put into large production .

Warm tips :

1. As addition cure silicone is a kind of platinum cure system ,which will be easy to cause uncure problem ,so

Kindly follow the tips below :

ï¼ŠDo notmix withliquidcondensation silicone rubber or even the tool which used for condensation silicone

ï¼ŠDo not mix withorganic matter which contains N, S, P organics and ionic compound like Sn, As,Hg, Ph,

ï¼ŠDo not add any pigment or powder into the addition cure silicone rubber without any testing toprevent uncure problem

Package

20KG/drum vacuum packingfor part A +20KG/drum vacuum packingfor part B

**0KG/drum packingfor part A ***0KG/drum packingfor part B

Shelf life

Twelve(12) months when storedunder dry and cool place by original package under*5â„ƒ

国:	China
モデル番号:	HY-E630
离岸价格:	9 ~ 13 / Kilogram ( Negotiable ) （交渉可能） Get Latest Price
ロケーション:	Guangdong China
最低注文量の価格:	9 per Kilogram
最低注文量:	100 Kilogram
パッケージの詳細:	1kg/Jar, 5kgs/Jar, 20kg/drum, 25kgs/drum, 200kgs/drum
納期:	within 3 days after payment confirmed in our bank.
供給能力:	8 Ton per Day
支払いタイプ:	PayPal, Western Union, L/C, T/T
製品グループ :	HY-E series