Hydro-extractor

タイトルまたは説明

Hydro-extractor
 
1. Industrial centrifugal dehydrators are all three-legged pendulum structures, which can effectively reduce the foot vibration caused by the unbalanced load in the rotating hub during operation.
2. The machine roller is made of high-quality stainless steel, the cage base and the chassis are all cast iron materials, and the outlet pipe is under the chassis.
3. The main shaft is made of high-quality steel after heat treatment.
4. The transmission part adopts triangular belt drive, and the motor directly drives the centrifugal separation starting wheel, which can make the machine start slowly and gradually reach the design speed to ensure the smooth operation of the machine.
5. Please test the machine before using the industrial centrifugal dehydrator, pay attention to the safety of the test machine.
6. After the test machine is normal, shut down the equipment; *0 seconds after the power is cut off, the brake can be used to assist the shutdown.
7. After the equipment is completely stopped, evenly place the materials to be dehydrated in the inner tank of the three-foot centrifuge.
8.Start the industrial centrifugal dehydrator for dehydration.
9. After **3 minutes, there is basically no water flowing out of the water outlet, cut off the power supply, and shut down the centrifuge.
*0. Check whether the material reaches the expected dryness, and take the dried material out of the dehydration bin.