Induction heater for die-casting Aluminium motor case, motor shell of blind hole Motor stator rotor heat assembly Shrink fitting Interference fit

タイトルまたは説明

Induction Heater for Die-casting Aluminium Motor Frame/profile Motor shell/housing/enclosure/casing/cover with Blind hole Through hole Hot assembly

 Adopting principle of electromagnetic, the Induction Heater can pre-heat metal components between **0 °C (**2 °F) and **0 °C (**2 °F) thereby causing them to expand and allow for the insertion or removal of another component. Typically the lower temperature range is used on metals such as aluminium and higher temperatures are used on metals such as low/medium carbon steels. The process avoids the changing of mechanical properties whilst allowing components to be worked.  







Advantages of the Induction heater for Aluminium Motor Shell/ Motor Profile/ Housing:  

(Published by Tony mail: tudishen#**6 dot com)



Process controllability - Unlike a traditional electric or gas furnace the induction system requires no pre-heat cycle or controlled shutdown. The heat is available on demand. In addition to the benefits of rapid availability in the event of a downstream interruption to production, the power can be switched off thus saving energy.  



Energy efficiency - Due to the heat being generated within the component energy transfer is extremely efficient. The induction heater heats only the part not the atmosphere around it.  



Process consistency - The induction heating process produces extremely uniform consistent heat this often allows less heat to be used for a given process.  



No naked flame - This allows induction heating to be used in a wide variety of applications in volatile environments in particular in petrochemical applications.  



Industries and applications  



There are a huge number of industries and applications which benefit from induction shrink fitting or removal using the induction heaters.Such as:  



Automotive starter rings onto flywheels  

Timing gears to crankshafts  

Motor stators into motor bodies  

Motor shafts into stators  

Removal and re-fitting of a gas turbine impeller  

Removal and re-fitting of hollow bolts in electrical generators  

Assembly of high precision roller bearings  

Shrinkfitting of *-stroke crankshafts for ship engines  



Please contact us for more details of the Induction Heater for Aluminium Motor Frame Blind hole Through hole Hot assembly