• Key Specification

Integrated Pressurized Solar Geyser, Pressure Solar Geyser

HS Code: 8419191000
Daily Production: 500 Sets
Exports: Global
OEM : Available
 

• Working Principle of Integrated Pressurized Solar Geyser:

Integrated Pressurized Solar Geyser is a direct heating system. Heat pipe vacuum tubes plug to water storage tank directly. The conductive liquid in the heat pipe is heated by sunshine to be vapor. Vapor goes up to the header of the heat pipe, which is in the storage water tank to heat cold water in the tank. After heat exchange, the vapor becomes to liquid and goes down to heat pipe again. In this way, it follows a continuous circulation. Finally, you can get hot water from water tank to take comfortable shower or some other use.
As no water in the vacuum tube, the solar geyser can work well with some tubes broken
And the storage tank is pressurized with working pressure at 100Kpa to 600Kpa, you can get hot water with high pressure.

• Structure of Integrated Pressurized Solar Geyser:

  
   

• Material Specification of Integrated Pressurized Solar Geyser:

1, Inner tank: Stainless Steel 304 /316, 1.2mm
2, Outer tank: Galvanized Steel/Stainless Steel, 0.31mm/0.35mm/0.4mm/0.5mm
3, Insulation: PUF, 50mm/55mm/60mm
4, Vacuum tube: 3-targets, 58*1800mm, glass thickness 1.6mm/2.0mm, coating Al-N/SS/Cu
5, Frame: Galvanized steel, 1.5mm, 25 to 45 degree. Color is as your request. Or Stainless Steel, or Aluminum Alloy
6, Manual: English
7, Logo: Paste on tanks
 
 
 

• Available Model of Integrated Pressurized Solar Geyser:

• Available Accessory for Integrated Pressurized Solar Geyser: