JL-133 Butyl-type Caulking Waterproof Sealant

JL- **3 is single-component butyl rubber waterproofing sealant. It can be widely used in architectural structure  waterproof ,adjustable seam caulking. For concrete, metal, wood, stone and model steel surface all has very good adhesion, can be used as door window frame and wall body seal , metope waterproof seal and indoor decoration seal.

Use:

*Window frame and wall body seal
*Rain awning and the wall waterproof seal
*Larger displacement of the roof, wall expansion joint caulking seal

Application guide:

*Bonding, sealing surface should be dry,clean, no oil, moisture etc.

*The beak cut to meet the requirements, with the iron wire or sharp beak stretching into,then cut the sealing place’s aluminum foil.

*Put it into the glue gun, directly force to squeeze on the sealing place.

*Need to scrape flat surface, you can use bamboo dipped in soapy water to trowelling, must be finish it in dry time table (*5 minutes)

Technical parameters and performance standards.

Attention:

*Bonding, sealing surface should be dry,clean, no oil, moisture etc.

*The product  will be have a little shrinkage after the glue . Make sure that the glue thickness and width, thickness is not less than 5mm, width is not more than *2mm, gap is too wide, requires divide second construction. stable stage is a week,and timely supply glue aiming at the part shrink cause the cracking.

*After the glue,color may have slight changes, is a normal phenomenon, will not affect its performance and quality.

*The company does not assume responsibilities due to choosing this product undeserved, improper construction, improper disposal caused by the joint liability and loss.