KOSED-15
Product description
This equipment is used to separate and recover the oil
contained in the water when an oil spill accident occurs at
sea. It is an electric and electronic skimmer that breaks away
from the hydraulic drive method of most existing skimmers.
Driven by battery (DC48V) or converter (AC220V → DC48V
conversion) depending on option (Operation is also possible
using a 3kw small generator) It weighs 5/1 compared to
hydraulic equipment and is characterized by safe and convenient
maintenance with a low difficulty operation method by
full-function remote control. In particular, since engine
hydraulic power packs and hydraulic hoses are not required, the
health and safety of workers due to exhaust fumes can be
improved, unintentional secondary contamination due to bursting
hydraulic lines can be prevented, and dispatch time in urgent
situations such as oil spills can be dramatically reduced. It
is a device that can be shortened to.
Overview
A disc-type electric skimmer equipped with a self-navigation
device, suitable for recovering light oil.
Operating principle
Put the main body into the contaminated site, put oil on the
rotating disk, separate it with a scraper, and collect it using
the centrifugal pump installed on the lower part of the
head.
Detailed specifications
|
Recoverable viscosity
|
4,000 cst or less
|
|
Type
|
Adsorption (disc)
|
|
Recovery capacity
|
15㎘/h
|
|
Manufacturer (Nationality)
|
Korea Marine Environment Corporation (KOEM), Seongdong
Ocean Tech, Inc. (Korea)
|
Configuration details
|
Division
|
Specifications and Features
|
|
SKIMMER HEAD
|
L × W × H
|
72×90×58(ãŽ)
|
|
Weight
|
48ãŽ
|
|
Number of disks
|
8ea
|
|
Material
|
ABS, Aluminum, Stainless
|
|
Pump
|
1 Centrifugal pump built-in
|
|
Self-defense device
|
2Units, 1.5knot
|
|
Recommended environment(temperature)
|
0 ~ 50℃
|
|
Battery
|
L × W × H
|
19.5×40.5×23(ãŽ)
|
|
Weight
|
14kg
|
|
Output power
|
Output: DC48V
|
|
Usage time
|
4~6hours
|
|
Charging time and recommended temperature
|
6~8hours (Discharge->Fully charged), 0 ~
45℃
|
|
Recommended environment(temperature)
|
-20℃ ~ 50℃
|
|
Remote controller
|
Model
|
HBC(社) FST727 Spectrum B
|
|
Manual Remote controller
|
L × W × H
|
16×8×6(ãŽ)
|
|
Receiveable distance
|
Maximum 150(m)
|
|
HOSE
|
Hose standard
|
1″×30m×1set
|
|
PUMP
|
Maximum vertical lift
|
20(m)
|
Device Description
ã€Electric drive type skimmer】
KOSED-15 breaks away from the hydraulic drive method that
conventional skimmers have adhered to, and solves the problems
of existing hydraulic skimmers. It is an equipment that greatly
improves the convenience of workers by improving the
inconveniences that workers have experienced directly, such as
lightening heavy equipment, simplifying accessory equipment
with complex configurations, and improving the working
environment. It was developed to improve convenience.
〠Device Features 】
The oil transfer pump (BLDC electric pump) applied to KOSED-15
is driven by direct supply of electricity from the power
source, and has a higher driving force than the hydraulic pump
of the existing hydraulic oil collector. This is the effect of
simplifying the driving process of the pump. The hydraulic pump
of the existing oil collector is operated through a process of
5 steps (engine→hydraulic pump→hydraulic distributor→hydraulic
motor→oil transfer pump), whereas the electric pump of this
technology Drive energy loss can be prevented by directly using
the power from the battery for driving. This simplification of
the process also has a side effect of removing auxiliary
materials (hydraulic control unit, hydraulic line, etc.)
installed inside the equipment, so that it can be made smaller
and lighter than existing pumps, so high-efficiency work
results can be expected.
