タイトルまたは説明
KW***8 Waterborne sanded
epoxy tile grout adhesive for ceramic tile
sealing
Application Instructions
Product Description
Koway colorful epoxy sealant is two components waterborne epoxy
resin products ,made with imported raw materials and advanced
technology. A part is composed of epoxy resin and inert filler, B
part is composed of water-based curing agent. The main features
of the product are:
• Easy to DIY and clean
• High material utilization
• High mechanical strength
• Good chemical resistance
Package
3kg/Plastic Barrel
5kg/Plastic Barrel
Application areas
For joint gaps ***5mm between antique tiles, tiles, stone, mosaic
installation and grouting, including:
• General floor and wall tiles
• Wall and floor tiles for bathrooms and shower rooms
• Ground heating construction
• Terrace and balcony
Construction steps
Base material treatment before construction
Ensure that the fixed tile cement mortar or adhesive is
completely dry and solidified, the gap must be clean without
particles, powder sundries, and the gaps should be left to 2/3 of
brick thickness, then clean the gap in excess mortar or adhesive.
Mixing ratio
Mixing ratio: A:B=**0:8 weight ratio
Construction Steps
Gap clean: Clean up tile gaps.
Mixing:Open the drum,take out B part hardener and pour it into A
part(Creamy) drum,mix them by electronic drill with blade until
the color is uniform and no lumps.
Gap Filling: 1.Apply mixed sealant on the working surface and use
rubber blade to spread on all gaps.
2.Spray water on the working surface and do the first clean with
scouring pad.
3.Do the second clean with a sponge. Absorb the water and remove
all the residues .Keep the surface complete,smooth and clean.
4.Can be walked after *4 hours curing.
Cleaning and Maintenance
•It is better to do Cleaning and maintenance faster,and it should
be finished before the adhesive is dry.Pay attention not to leave
stains on the tile surface. Cleaning and trimming work is done
before the product is cured.
•First spraying water on the construction surface, by a spatula
with hard scouring cloth or white felt cloth to clean.
Use clockwise or counterclockwise operation Action, seal all tile
surface intact while remove redundant filler from tile surface.
•Then use the yellow artificial sponge for the second time to
clean, to absorb excess water, remove the tile surface
superfluous products, while maintaining the seam type intact,
smooth surface, clean.
• When the scouring cloth and sponge is stained with epoxy
resin,and can not continue to use, it should be replaced. Stains
or residues should be cleaned before they are cured, not cleaned
after curing, and removed by mechanical means.
Cautions
• Recommend use this product within a temperature range of *8 ℃
to *5 ℃. Do not use in low temperature or high humidity
environment to avoid the surface carbonization of the color
uniformity is affected.
• Ceramic tile surface residues must be removed as soon as
possible, because once it is completely solidified, it can only
be removed by mechanical method, which will seriously affect the
effect of completion.
• The ratio of two components (A+B) must be correct.
• Clean water should be changed frequently.
• Clean cloth or sponge covered with epoxy resin in time to
replace.
• Do not walk on the surface of the finished construction, lest
epoxy resin pollute the surface.
• Do not use cloth or other materials to cover the seam surface,
so as to prevent condensation of the product surface carbonation,
so that uneven color.
• Do not use for industrial product materials with porous surface
• Applied to natural stone, in order to test the absorption of
epoxy resin tablets, it is necessary to carry out a preliminary
test, in the case of absorption, the side and surface of the
slate will form dark stains, these stains can not be removed, it
is more common in light-colored marble.
• Do not use the product to fill a container or sink for the
storage of corrosive substances.
• Do not mix with water or solvents
• When the construction of the eyes and other parts of the water
rinse, timely medical examination.
| 国: |
China |
| モデル番号: |
KW5288
|
| 离岸价格: |
5 ~ 12 / Kilogram ( Negotiable ) （交渉可能）
Get Latest Price
|
| ロケーション: |
Hunan,China |
| 最低注文量の価格: |
5 per Kilogram |
| 最低注文量: |
- |
| パッケージの詳細: |
3KG/DRUM |
| 納期: |
5-10 days after receiving deposit |
| 供給能力: |
100000 Piece per Month |
| 支払いタイプ: |
L/C, T/T |
| 製品グループ : |
Epoxy tile grout adhensive
|
