low voltage 6% electrical reactor

With the wide use and development of the power electronics technology,power supply system caused a number of non-linear loads, such as low-voltage low-capacity appliances and high-voltage high-capacity equipment such as industrial rectifier equipment, frequency conversion equipment, which will make current, voltage generate distortion, thus causing grid harmonic "pollution." the harmonic pollution has seriously affected the reactive power compensation equipment for safe operation. parallel capacitor and reactor with appropriate reactance rate connected in series is to solve harmonic amplification and protect capacitor, it is a effective and feasible method,the main function of our 6% electrical reactor is to suppress higher harmonics and capacitor inrush current,to prevent capacitors from harming by harmonics.

1.Rated Voltage: 0.4KV 0.*5KV 0.**5KV 0.*6KV
2.Reactance ratio: 6.0%
3.Isulation : 3KV/min.
4.Temperature rise: ≤*0k.
5.Noise Grade: ≤*5dB.
6.It can work under the 1.*5In for long time.
7. Reactance linearity: It shall be no less than 0.*5 while 1.8 times rated current .
8. For three-phase reactors,the difference of reactance values between any two phases shall be within ± 3%.
6% reactance rate

1,The ambient air temperature must not exceed **0 °C, but also in the *4 h period the average temperature does not exceed **5 °C,the ambient air temperature not lower than **5 °C.
2,Relative Humidity: clean air, at a maximum temperature of **0 °C, the relative humidity must not exceed *0%. At a lower temperature allows a greater relative humidity. For example, when the temperature is **0 °C the relative humidity allowed be *0%,but this conclusion should take into account changes in temperature may occasionally cause some condensation.
3,Installation location altitude does not exceed ***0 m.
4,Environmental Requirments:Relative strong vibrations and shocks are not allowed, the existence of gas and conducting medium which will corrode metals and destroy insulation are not allowed; no explosion meduim; no conducting dust; no raining and snowing and mycete.
5,The installation location vibration conditions: Vibration frequency range of *0 ~ **0 Hz, the maximum vibration accelerated speed is less than 5 m/s2.