タイトルまたは説明

It's Maintenance Free Very Long Life ( More than *0 years ) Space Savings, Steady Performance, Corrosion Proof, Fit & Forget Technology Importance of good Earthing: For your very Important PLC based machines it is recommended that you need to maintain neutral to earth voltage below 2 volts. To maintain this one factor is powerful neutral and body earthing and if you fail to maintain this, it may fail your electronic cards and this may cost you from Rs. ***0 to Rs.2,*0,**0 . Many times it is observed by electrical people that their machine failed and the reason was neglected proper earthing or maintaining the existing earthing. Maintenance Free Earthing System Details: Earth Electrode: Earth Electrodes are made from GI pipes & Strips of Hot Dipped GI & Copper. The Strip is inserted in Pipe and space around this strip is filled by a special highly conductive and **0% non-corrosive Material. Earth Stimulating Material : Earth Stimulating Material is ideal earth fill material to get lower earth resistance. It is used as protective and contact material to fill between earth electrode and surrounding soil. It enriches the electrode surrounding with charge carriers for high conductivity. When water is added to it, it absorbs plenty of water about four to six times its dry volume, it becomes a dense paste. This consistency holds its own shape and sticks on to any surface it touches. This consistence helps hold the Earth Electrode in place. Increased volume makes tight contact from Electrode to Earth Stimulating Material and Material to soil. It never wash away in water. It never dries out, as it is "hydrophilic" and absorbs moisture from the soil to remain hydrated and will maintain its density. In direct sunlight the top few inches will become hard and seal itself off, but the rest of the material stays moist and conductive. It is non corrosive, non-toxic and harmless to the soil or surrounding vegetation.