Makerbot,UP,Reprap 3D printer filament 1.75mm 3.0mm ABS filament PLA filament in many colors

タイトルまたは説明

3D filament ABS filament PLA filament 1.*5mm 3.0mm many many colors for your choose

we have colors for 3D printer filament PLA flament & ABS filament:

 

Natural, white, black, red, sky blue, dark blue ,florescent green,dark green,florescent yellow, dark yellow ,orange, purple, pink, grey, brown, glow in dark etc

 

 

fluorescing or glowing/shiny materials offered
 

The advantages of our PLA filament compared with other ordinary ones:

Nowadays PLA (polylactide acid) is recommended by many 3D printer manufacturers as a pressure medium. On the one hand because of the lower melting temperature compared to ABS, the other part due to the color stability.

The biodegradability of the plastic is dependent on specific environmental conditions. Since these conditions are really given only in industrial composting facilities, we ask you to let throw away the plastic but not specifically recycle.

Smooth, dimensionally stable and bubble-free surfaces characterize our plastic wires. For a simple and consistent way of processing the low tolerances provide. And our products have additional advantages as below:

 

 

 

The advantages of our ABS filament:

The synthetic polymer and relatively stable ABS (acrylonitrile-butadiene-styrene copolymer) is particularly characterized by toughness and strength. ABS has a high surface hardness and the general extrusion temperature is about **0 ° C. Especially at high mechanical loads on the print objects ABS should be used.Our products also have following advantages:

 

(1) ABS filament we made ishigh strength, good toughness;

(2)density is small, when printing larger volume model lighter, save money;

(3) cost-effective, can be processed in wide range temperatures;

(4) Good human biocompatibility, avirulent and harmless

(5) diameter of 3.0/1.*5mm, variations + /*0.1mm,roundness +/*0.*5mm;

(6) Good biodegradation, suitable for family compost degradation

(7) to be applied to a variety of 3D printers, Makerbot, Mendel, Prusa, Huxley, WeisTek, Thing-o-matic, Ult, BFB series, etc

 

The advantages of our company:

1. Produce process

I . Before produce extruding filament ,we will dry ABS and PLA for a enough time (**5 hours).

II. Mix with colors masterbatch or colors powder, all which .certified with ROHS.

III. Adjust temperature and dragging rate , make filament diameter range at 1.**1.8mm/2.**3.0mm, roundness +/*0.*8mm, each spool net weight 1kg+/*0.*5kg

IV we put all filament spool in shelf, different kind in different shelf, all categories arrange orderly.

2. Production quality control

I. we have diameter laser detect kits to control extruding rate on line, when diameter smaller or higher than accept range, the laser detect kits will adjust the extruding rate higher or smaller to make diameter range at acceptable.

II. keep each record filament samples sent to customers, build a tracking able document.

III. when the filament put on shelf longer than half a year, we will dry the filament again.
 

3. About waste & recycle

Much time you will find some black filament is too brittle, that added and mixed with some recycle and scrap after produced.

We haven’t produced with scrap outlet, rework & recycle material, or dispose, but for quality assurance purpose.

 

4. Packaging

We put each filament /spool on seal PE vacuum bag, then in smaller box, then out big carton

We also have vacuum heated bag to replace of PE bag, make better avoid moisture.
 

5. Research and developing

We have engineers that specialty in color formulation ,plastic modification, packaging, quality control ,producing control, we can do according to your requirements .

 

Payment methods:

We accept the following as the payment methods:

T/T, L/C, Western Union, PayPal, MoneyGram, you can choose anyone you want to make th payment.