タイトルまたは説明
We are Selling Manual capsule filler:
Our most popular model, this well-constructed workhorse is easy to
use. This model is perfect for the occasional user or for small to
moderate quantities. Additional encapsulator machines **0 **5 are
available.
MANUAL CAPSULE FILLER
The manual capsule filler has 6 parts:
1. Cap sheet
2. Encapsulation sheet
3. Bottom sheet
4. Spreader
5. Tamping tool
6. Middle sheet
Procedure:
1. Take the cap sheet. Place it on a clean, dry surface.
2. Place the encapsulation sheet on top of the cap sheet
using the stainless steel to fix it correctly in place.
3. Pour capsule tops into the encapsulation sheet and, using
a circular motion, gently shake the tops into the holes.While doing
this, cover the gap in the wall of the encapsulation sheet with one
hand to avoid spilling the tops.
4. When the holes are filled pour out the excess tops.
5. Remove the encapsulation sheet and put the filled cap
sheet to one side.
6. Now take the bottom sheet. Fix the encapsulation sheet to the
bottom sheet, using the black pegs to fix it correctly in
place.
7. Pour bottoms into the encapsulation sheet and shake as
before to fill the holes. Pour off excess bottoms
8. Remove the filled encapsulation sheet and put it carefully
to one side.
9. Pour a scoop of powder filler onto the bottom sheet and
use the spreader to fill the bottoms.
*0. If the bottoms are not filled enough, use the tamping
tool to compress the fillings and repeat the previous
procedure.
*1. Remove the tamping tool and put it and the spreader to
one side.
*2. Take the filled cap sheet and place the middle sheet on
top using the black pegs protruding upwards to fit it correctly in
place.
*3. Turn the cap sheet / middle sheet over and fix to the
bottom sheet.
*4. Now, stand up.Place both hands on the top.Push downwards
with equal pressure .Turn the whole set over. Place both hands on
top. Push downwards to lock the cap
