タイトルまたは説明

1. The MEZ-FLANGE-SYSTEM allows fast and economical connection of ducts. A permanently developing system that has been successful in the market for more than *0 years. The advantage of the four screw connection is the fact that the duct only needs to be bolted together in the four corners. The MEZ-FLANGE profile is stressed to provide uniform pressure over the entire length of the joint. This already ensures a tight mechanical fit. 2. The customer can choose from different flanges and corners of system *0, *0 and *0. Aluminum and stainless steel flanges and corners are also available. 3. For the manufacturing of isolated ducts we offer MEZ-ISOFLANGE and MEZ-ISOKLEMM. With these two products remarkable and permanent reduction in temperature losses can be experienced. Any sound dissipation problems are normally solved. The MEZ-ISOKLEMM profile - made out of PVC - prevents heat flow between the inside and outside of the duct. 4. MEZ-TECHNIK supplies different components for the direct connection of slats, partition and flow plates and other sheet metals requiring connection at an angle. These are not only used successfully in duct manufacturing, but also in building projects. 5. With MEZ-CLAPITUREN a multifarious assortment of leaf dampers for air-flow regulation are at your disposal. Of course the use of pre-fabricated dampers can reduce the installation task. MEZ-CLAPITUREN are available for rectangular and circular ducts. 6. MEZ-KREUZ 7. Stiffening systems are not only necessary for the stability of ducts with larger cross-sections, but also to prevent vibrations generated by the airflow on thin walled duct sheet metal. MEZ-KREUZ offers an easy to handle, economical solution. 8. Our different access doors for rectangular ducts fulfil all requirements. The access doors are available in many sizes. You can also order isolated or heat-resistant doors at MEZ-TECHNIK. 9. With MEZ-CORNER POST PROFILES, metal cabinets and machine frames can be produced quickly