Description

Mobile gold recovery plant HC***6 is composed by hopper, rock hammer crusher, sluice box, gold separator, YC diesel generator, diesel engine, water pump and combined type frame etc, besides it equip mechanical leveling device which can support the system firmly, in order to ensure that gold particles have the optimum separation.

1. Component element
(1) Crush system The rock hammer crusher driven by *0HP diesel engine, it can break rock which is not bigger than *0mm to minus 2.8mm, in that case useful mineral can be completely liberated from the rock, then flows to gold sluice box which as rougher for separation.
(2) Rough system
The rougher is a gold sluice box, it's ***0mm length with **0mm width, it covered by professional gold recovery carpet.
(3) Clean system
The concentrate get from gold sluice box still has impurities, it should have a re-separation of enrichment for the gold. Shaking table is an excellent cleaner which can separate gold perfectly with very low cost. The power is 1.1Kw only.
(4) Water system
The plant adopts an unified water supply system, it can supply ***0 tons per hour, because of low quality of water allowed for gold separation, so the water can be recycled when it shortage. The power of water supply system is 1.5kw only.
(5) Gold purify device
Amalgamator can be added on the mobile plant according to customer's demand.
(6) Mobile device Whole plant move by wheels, and fix on the ground by mechanical leveling supports when it working.
2 Application
Feed raw ore which is not bigger than *0mm into the rock hammer crusher by hand. The crushed ore with water flows into gold sluice box directly, the carpet on the gold sluice box can catch all heavy particles, moreover light particles flow away with water because of gradient. Clean those heavy particles from the carpet and put into shaking table by hand for gold separation.
Nowadays conditions of the majority of rock gold mining become worse to worse, large-scale mining machine is limited by the condition, mobile gold recovery plant is an excellent solution for small scale miners, because it's flexible, convenient, movable, low cost and high recovery, it apply to small scale mining of rock gold or placer gold.
3 Operation
(1) Try to find a place where is near water source and relatively flat, put the mechanical leveling supports down until all wheels hang in the air, adjust leveling support to ensure the operating platform is level. Take water pump to the water source, check whether the pipe is connected. Start the engine on.
(2) Feed raw ore into crusher equably and stably, check slurry out from bottom of crusher whether it's unblocked, control the water ensure to get best concentration for the slurry. In order to have higher recovery, recommend that clean the carpet every 3 hours. Collect all heavy mineral together, and then feed it into shaking table for separation.
(3) Because the operating platform is very quivery when the crusher is working, please shut it down when the shaking table start separating work. The gold get from shaking table if it's still with little impurity, it can be purified to over *0% by amalgamation.
(4) Please clean machine before shut it down, take water pump and pipe back and put them to right place, fix the table of shaking table, raise the mechanical leveling supports and then drag the trailer go next mining place.