タイトルまたは説明
Reasons
to Purchase Our Signal Repeaters
Signal Repeater are very effective
equipment that can offset the covering shortage of the base
station of the mobile network, expand the cover range of the base
station and fill the signal blind zone to ensure the convenient
and pleasant communication. The only requirement signal repeater
need for all this is at least middle range signal outside this
area.
If you are in such a situation and
thinking about your own repeater, please bare in mind that all
our products have a huge list of advantages:
. Signal
booster provides the well-organized service thats why after
installation of the system the quality of the connection will be
really great.
1) In our casemore bars more
calls
2) Signal
Repeater requireno
additional wires being attached to your
cell phone thus allowing you to use your cell phone without any
extra troublesome accessories, in other worlds, no physical
connection to your cell phone.
and with
competitive price. You will not need to hire anybody to provide
the installation of the equipment. Youll be able to install it by
yourself using only the manual list attached to your signal
repeater.
3) They arepractical, beautiful,
easy to install
4) Signal booster
works atfull
duplex. It means that they are
not only receiving the signal from the base mobile station but
they also send the signal to the base mobile
station.
5) Our
equipment iscompletely
safe.
Signal booster dont produce any radiation
6) Signal
boosters are able to cover different
coverage: from small to large. In this case you
can decide which of signal repeater is suitable for your office
or supermarket.
Key
specifications
Working
system: CDMA/PCS Frequency
range: CDMA: Uplink
**4~**9MHz Downlink **9~**4MHz
PCS: Uplink***0~***0MHz Downlink
***0~***0MHz Gain: Uplink≥*5dB
Downlink *0dB Output: Uplink
*5dBm Downlink *0dBm Connector: N
connector Pass band ripple: ≤2.0
dB I/O
impedance
: *0Ω Noise
figure: ≤*0dB Transmission
delay: ≤0.5μs Ambient
temperature: **5°C~*5°C Power supply: AC ******0V
DC*2V Size:
**4mm***5mm**8mm Reliability: To the
GB******6 standard Electromagnetic
compatibility: To the ETS**0 ****4 standard
Coverage
area: **0sqm
Mobile signal
repeater Installation Your system should come with at
least the following items: 1) Outdoor Antenna (goes outside
the building) 2) Signal
repeater 3) Indoor Antenna (goes inside
the building)! 4) Coaxial Communication
Cables 5) Connector
Step
1Start by taking your phone up to
the roof or other location outside to find where the signal is
strongest. Step
2Temporarily mount the Outdoor
(outside) antenna in that location. You may need to adjust and move
the antenna later. More notes on Donor antennas
here. Step
3Run coaxial cable into the
building to a convenient location (attic, etc.) where you can also
get standard power for the Signal Repeater.
Step
4 Place
the Signal Repeater in that location and connect the coaxial cable
to the Outdoor Side of the Signal Repeater and the Outdoor
antenna. Step
5 Mount your Indoor (inside)
antenna in a productive location. You may need to adjust or move
the antenna later. More notes on Indoor antennas and patterns
here. Step
6Connect coaxial cable between the
Indoor antenna and the Signal Repeater output
port. Step
7 Power
up the system and check for signal inside the building. If needed,
tune system by moving and or pointing the Outdoor and Indoor
antennas until they get the most signal
possible. Step
8 Secure all antennas and
cables, securely mount the Signal repeater and clean up the
installation.
| 国: |
China |
| モデル番号: |
Mobile phone signal repeater 1085A
|
| 离岸价格: |
( Negotiable ) （交渉可能）
Get Latest Price
|
| ロケーション: |
China |
| 最低注文量の価格: |
- |
| 最低注文量: |
10 Piece |
| パッケージの詳細: |
1 pc a box and 20 pcs a carton |
| 納期: |
1-3 working days against full payment |
| 供給能力: |
10000 Piece per Month |
| 支払いタイプ: |
PayPal, Western Union, T/T |
| 製品グループ : |
- |
