Mobile signal booster F10

タイトルまたは説明

F*0 single band repeater is to support any one mobile band existing in the world to help end users to improve mobile signals for much better phone call quality and smoother data transmission. It is designed to support coverage area up to **0~**0 square meters with proper engineering. Below are the main features:

1. The consumer repeater is an ideal solution for providing a cost effective improvement in cellular in-building coverage of a home, office, restaurant or building, in the quickest time possible.

2. Manual gain control (MGC) available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance.

3. To maintain safe and specific output signal levels and give alarms on self-oscillation, the repeater has built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of signals.

4. Auto shut off function available for both uplink and downlink to avoid deep self-oscillations from jamming the towers, saving your trouble from operators.

5. Wide band feature enables all devices operating within the wide frequency range of the repeater to see an improvement in performance.

6. Multiple phones and other handheld devices throughout a building can benefit from a wireless repeater.

7. Supports up to (*0) users / calls simultaneously.

8. Extended phone battery life. (Your phone does not need to put out as much power due to improved reception.)

Repeater kit:

1. Repeater unit with power cord and adaptor.

2. External Panel 7dBi as donor antenna.

3.*0meter long 3D coax cable with loss of 3.5~5dB depending on different working frequencies (**0~***0MHz).

4. Whip server antenna N Male.

Specification:

Electrical specification 

Uplink

Downlink

Frequency Range

CDMA**0

**4 ~ **9 MHz

**9 ~ **4 MHz

CDMA***0

***0 ~ ***0 MHz

***0 ~ ***0 MHz

GSM**0

**4 ~ **9 MHz

**9 ~ **4 MHz

GSM**0 & EGSM