タイトルまたは説明

HA*2 battery equalizer is used for the batteries which are connected in series to keep the voltage of batteries are equal when the batteries are charging or discharging. When the batteries work in series connection, the batteries voltage maybe will be not same due to the difference of each cell chemical composition and temperature. Andeach batterys selfdischarge rate also different. So even the batteries not work, their voltage of series batterieswill be also different. These differences will cause battery lost balance, this means maybe one battery is overloaded and the other is insufficiently charged. The voltage difference will be increased with the battery repeated charge-discharge process. This will result in premature failure of the batteries.
HA*2 battery equalizer is suitable for lead-acid batteries(VRLA), lithium iron phosphate batteries(LFP), nickel-cadmium secondary batteries(Ni/CD), and nickel-metal hydride secondary batteries(Ni/MH). It starts work when the voltage higher than 2.4V, it means that this equalizer can be used in a single cell battery range from 2.4V to *2V.
One equalizer can connect 4 batteries once a time, if battery less than the 4, the extra cable can be vacant (positive and negative terminal should be avoided), does not affect the equilibrium effects. The equalizer is not affected with battery connection way, no matter in series or in parallel, both can work.

TECHNICAL DATA
Battery nominal voltage: 4* (2.4V/3.6V/6V/9V/*2V)
Optimizing current: ***0A
Quiescent current: 5mA(*2V) 1.2mA(2.4V)
Dimensions: *2***4**7 mm
Protection: Reverse polarity protection
Under voltage lock out: 1.8V