NEGATIVE ELECTRODE MATERIAL OF DIGITAL BATTERY XKT-Z2P
Integrated supplier of anode materials for lithium-ion
batteries
XKT-Z2P Product Introduction
â— Product introduction: using high-quality artificial coke
as raw material, through grinding, granulation, carbonization,
graphitization and other processes.
â— Product features: high energy density, long cycle.
â— Application scope: suitable for all kinds of energy
storage/power cylindrical batteries, square batteries, soft pack
batteries
Suggestions for Use
The designed gram capacity of the material is **0mAh/g, and
the compaction density is controlled at about 1.*0~1.*5g/cm3
(adjusted according to areal density and battery type);
Appearance: The appearance of the product should be black
powder, uniform color, no agglomeration, no sand and metal
debris
Performance index:
project unit Specifications Typical value testing method
Particle size D*0
μm ≥8 9.*5 BT****0 laser particle size analyzer
D*0 *6.0±2.0 *5.*9
D*0 ≤*6 *8.*5
Ash % ≤0.*0 0.*1 GB/T ********9
Tap density
g/cm3
≥1.0
1.*6 FZS**4B of Beijing Iron and Steel Research
Institute
Type automatic tap density meter
Specific surface area m2/g 1.3±0.3 1.*5 Nitrogen adsorption
method, Beijing Jinep
F-SORB***0 BET analyzer
Specific discharge capacity mAh/g ≥**0.0 **2 GB/T *********0
General Specification for Lithium Ion Batteries for Cellular
Phones
First-time efficiency % ≥*3.0 *4.2
Precautions during product use
Ensure that the capacity of the negative electrode per unit
area is greater than or equal to the capacity of the positive
electrode per unit area to avoid lithium evolution during the
charging process;
Ensure that there is a good interface between the isolation
membrane and the electrode;
The areal density and compaction density of the electrode will
affect the rate capacity and performance;
It is recommended to use the formula "active material:
conductive agent: CMC: SBR=*5.0: 1.3: 1.4: 2.3" (customers can make
a reasonable design according to their own process)
Product packaging and environmental protection
requirements
Packaging: Vacuum inner film bag packaging + outer bag carton,
rear pallet packaging; packaging and packaging according to
customer requirements;
Declaration: The product complies with the EU RoHS Directive
"Restriction of the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment", and the content of toxic and
hazardous substances or elements contained in the product does not
exceed SJ/T *********6 "Restriction of Hazardous Substances in
Electronic Information Products" The limit requirements stipulated
in the "Limit Requirements".
Product storage and transportation
a) The product should be stored in a ventilated, dry place
without pollution sources;
b)The product stacking should be neat and clean, and the
production batch number, production date and other signs should be
clearly identifiable;
c)Avoid mixed storage and transportation with items that can
deteriorate the product or damage the packaging bag;
d)During storage and transportation, ensure that the product
packaging is clean and undamaged. Any product that leaks out of the
package must not be returned to the package.