S9 Specifications:

1. Hash Rate: *1.*5TH/s ±5%

2. Power Consumption: ***2W + 7% (at the wall, with APW3 ,*3% efficiency, *5C ambient temp)

3. Power Efficiency: 0.1J/GH + 7%(at the wall, with APW3 *3% efficiency, *5°C ambient temp)

4. Rated Voltage: *1.*0 ~*3.*0V

5. Chip quantity per unit: **9x BM***7

6. Dimensions: **0mm(L)***5mm(W)***8mm(H)

7. Cooling: 2x ****8 fan

8. Operating Temperature: 0 °C to *0 °C

9. Network Connection: Ethernet

*0. Default Frequency: **0M

*1. Status: New 

*2. Gross weight:7.5KG

Notes:

1.   Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.

2.   PSU: A power supply unit is not included, and you will need to provide an ATX PSU. There are 3 PCI-e connectors for **2V DC on each hashing board and all 3 are required. Do not connect more than one PSU to the same hashing board!

3. Bitmain recommends theAPW*********-B2 power supply for use with the S9. One power supply support one S9.

4. Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner after ALL the *0x PCIE connectors connected to power supply.