タイトルまたは説明

Technical:

-Master volume***************************************4 ×**0mm

-Weight************************************************0g

-Input voltage****************-AC******0V,****0Hz

-Battery voltage*******************************3.**4.2V

-Wavelength***********************************5nm.

Optical parameters:

-Wavelength*********************-   ******0mm

-Illumination**************************0mw/cm²

Installation:

1.machine installation:

The machine between the host and battery put decorative ring,tighen the screw part of the targeting.

2.the installation of optical bar fried machine at the top into the hole slightly inward rotation,until the 

Department of push in the end.Note that the optical rod is fragile items,please be careful installation.

3.shading film installation:

Light bars will be aligned on the shading film can be pushed into the hole gently.

4.Connect the charger:

Plug in the charger ******0AC power supply,the output plug into the socket charger base,rechargeable battery back-end will be inserted in the charger base.

Attentions:

1.Please strictly follow the instructions to use,we are nto responsible for the consequences of improper use.

2.The machine the next time interval used should be more than *0S.

3.Optical glass rod is fragile,be careful to use,when the light guide rod obvious damage,cracks will affect the curing effect,replace the new optical stick.

4.Optical bar disinfection method:soak afew minutes with *5% alcohol.

5.The charge is complete,plug the charger to pull out'from the outlet above.

6.The machine used forf some time(*0 times),the battery voltage decreases,will affect the curing effect,should be promptly charged.

Using a high-performance lithium-ion battery,can charge the battery at any time without affecting battery longevity.

7.Do not use other than in addition to Original charger power supply,or they may cause serious damage to equipment and personal harm.

8.If the demolition and change machines,this company shall not bear any responsibility for products.

9.Because the upgrades made to change without notice.

After service:

   The product from the factory the day.in teo years does not work due to quality reasons,and my company is responsible for freerepair.(Light bars are fragile commodities,not within the scope of the warranty,battery warranty for one year)

One of the following circumstances,charges only for maintenance:

1.because the user did not follow the instructions requested operation,maintenance,custoday,or the user inadvertently damage.

2.due to user damage caused by the demolition of the machine.

3.battery performance for users and parameters do not meet the damage.

4.due to damage cause by irresistible factors.

5.beyond the free warranty period.

Packing list:

CuringLight Host***********************1pcs

Fiber Light Stick************************1pcs

Power Spply****************************- 1pcs

Shading Film*****************************1pcs

Manual*************************************1pcs