OEM ES11101 esd overcoat with cotton EPA label

OEM Service Antistatic overcoat polyester type 5mm strip or grid

OEM antistatic cotton overcoat

In the use of antistatic clothing notices should be taken as follows:
Generally dont use non-antistatic fabric as lining. When needed, the use of lining should not exceed *0% of the total area of the lining. Operators in antistatic work area may not wear clothing from.
Dont adorn any metal annex. When needed, it shouldnt be directly disclosed to the dress surface, in order to avoid metal discharge. wear antistatic clothing before entering antistatic work area.
Antistatic clothing should be designed to be three -tight, and be good at resistance and preventing dust.

Antistatic clothing must be use with antistatic shoes. According to the national standard, check up them every other year. If value of electricity exceeds set value, they couldnt be used as before.
If relative humidity is below *0%, cotton clothing is not suitable for antistatic clothing, because it failed to prevent accumulation of static electricity.

Static dissipative (ESD) Smock for use in Cleanroom areas
Composition of fabric:
*8% polyester + 2% conductive fiber

Wrap density: **0±*0/*0cm
Unisex design

Available in all sizes
Colors available: white, green, light blue and etc
Typical surface resistance
Rs ≤**7Ω
Permeability to air: 4.5 to 5.0ml/s

 

ES****1 Anti-static cotton overcoat
	length	chest	sleeve	shoulder
XS	*0	**6	*7	*2
S	*1	**8	*8	*3
M	*5	**2	*9	*5
L	*7	**6	*0	*6
2L	**0	**2	*2	*0
3L	**3	**8	*4	*3
4L	**6	**2	*6	*6
5L	**8	**6	*8	*8
6L	**0	**0	*0	*0
7L	**2	**6	*2	*2
8L	**4	**2	*4	*4

 

esd labcoat, smock, overcoat, gown 

*8% polyester + 2% carbon 

open collar, inside zipper type 

 

open collar, type

 

closed collar, inside zipper type

 

*4% polyester **4%cotton*2% Carbon

 

 

 

 esd jacket